「おすすめ出品」の要件を満たす出品はありません
詳細はこちら

「おすすめ出品」の要件を満たす出品はありません

以下のような出品が「カートに入れる」ボタンが付いた「おすすめ出品」として取り扱われます。

  • 競争力のある価格設定
  • 信頼できる配送オプション
  • 満足度の高い顧客サービス
「おすすめ出品はありません」とは、現在これらの基準をすべて満たした出品がないことを意味します。「すべての出品を見る」を選択して、購入可能な商品をご覧ください。

お届け先を選択

S.H.フィギュアーツ スター・ウォーズ バトル・ドロイド ジオノーシスカラー 約155mm ABS&PVC製 塗装済み可動フィギュア

4.2 5つ星のうち4.2 35個の評価

在庫状況について

この商品について

  • (C)& TM Lucasfilm Ltd.
  • 対象年齢 :15才以上
ホビー商品の発売日・キャンセル期限に関して: フィギュア・プラモデル・アニメグッズ・カードゲーム・食玩の商品は、メーカー都合により発売日が延期される場合があります。 発売日が延期された場合、Eメールにて新しい発売日をお知らせします。また、発売日延期に伴いキャンセル期限も変更されます。 最新のキャンセル期限は上記よりご確認ください。また、メーカー都合により商品の仕様が変更される場合があります。あらかじめご了承ください。トレーディングカード、フィギュア、プラモデル・模型、ミニ四駆・スロットカー、ラジコン、鉄道模型、エアガン・モデルガン、コレクションカーおよび食玩は、お客様都合による返品・交換は承りません。

注記: Amazon.co.jpが販売・発送する商品は 、お一人様あたりのご注文数量を限定させていただいております。お一人様あたりのご注文上限数量を超えるご注文(同一のお名前及びご住所で複数のアカウントを作成・使用されてご注文された場合を含みます。)、その他Amazon.co.jpにおいて不正なご注文と判断した場合には、利用規約に基づき、予告なくご注文をキャンセルさせていただくことがあります。

注記:Amazon.co.jpが発送する商品につきまして、商品の入荷数に限りがある場合がございます。入荷数を超える数量の注文が入った場合は、やむを得ず注文をキャンセルさせていただくことがございます。"

【まとめ買いフェア開催中】よりどり2点以上で5%OFF
アウトドア用品、ファッション、食品・飲料、母の日ギフト、父の日ギフト関連商品など、10万点を超える対象アイテムからよりどり2点以上で5%OFF。 セール会場はこちら

登録情報

  • メーカーにより製造中止になりました ‏ : ‎ いいえ
  • 製品サイズ ‏ : ‎ 18.21 x 10.8 x 4.29 cm; 4.54 g
  • 発売日 ‏ : ‎ 2016/10/21
  • Amazon.co.jp での取り扱い開始日 ‏ : ‎ 2016/7/31
  • メーカー ‏ : ‎ BANDAI SPIRITS(バンダイ スピリッツ)
  • ASIN ‏ : ‎ B01J7JNHO0
  • カスタマーレビュー:
    4.2 5つ星のうち4.2 35個の評価

商品の説明

S.H.Figuartsより好評のバトル・ドロイドがジオノーシスカラー登場。

■パーツ差し替えなしで、収納状態から起動後の状態へ変形可能。
■C-3PO頭部が付属。差し替えでSTAR WARSの名シーンを再現可能。
【セット内容】本体、交換用C-3PO、交換用アンテナパーツ、ブラスター

(Amazon.co.jpより)


ブランド紹介

特定の情報をお探しですか?

カスタマーレビュー

星5つ中4.2つ
5つのうち4.2つ
35グローバルレーティング

この商品をレビュー

他のお客様にも意見を伝えましょう

上位レビュー、対象国: 日本

2016年10月30日に日本でレビュー済み
Amazonで購入
昨年発売のバトルドロイドのリニューアル品。
ボディカラーが惑星ジオノーシスの赤茶けた風土に合わせた物へと変更になっている。
ボーナスパーツとしてEP2版のC-3POの頭部が付属、ドロイド生産工場で間違えてバトルドロイドのボディと
接続させられ、コロシアムにてジェダイVSドロイド軍団の戦いに巻き込まれた際の3POを再現可能。

実写作品ではEP2のみしか出番が無かったがCGアニメの「クローンウォーズ」のシーズン2にて
再びジオノーシスを舞台とした戦いに再登場し、クローン軍やジェダイと激しい戦闘が行われた。
通常カラーは再販が無いせいで未だ3900~4000円台が相場となっているが、ジオノーシスカラーは何故か
今現在なら2000円台前半と価格が半額近くになっている為、EP2主体で揃えたい人は今がチャンス。

こうなると魂ネイションで参考出品されていたスーパーバトルドロイドも欲しくなるが、
新3部作の主人公のアナキン(EP2版)がプレバンでの受注販売という憂き目に合っている現状を鑑みると
敵ドロイド系の一般販売はこのバトルドロイドが最後になるかもしれない…。
グリーバス将軍とかマグナガードとかドロイデカとかも何年かかってもいいから出してほしいのだが。

ここからは商品自体ではなく、商品に使用されている写真について酷評させていただく。
SWのフィギュアーツの公式サイトやアマゾンのバトルドロイド・ジオノーシスカラーの商品ページ、
またはバトルドロイドの箱の裏に掲載されている写真のミスについて指摘させてもらう。

2体のバトルドロイド(ジオノーシスカラー)にメイス・ウィンドゥとオビ=ワン(EP2版)が
取り囲まれている見本写真があるが、あろうことかオビ=ワンの持っているライトセーバーの色が緑になっているのである。
後にも先にも、実写作品でオビ=ワンが緑のライトセーバーを使用したのはEP1のラストでマスターの
クワイ=ガン・ジンの緑のライトセーバーをフォースで引き寄せてダース・モールを倒した時だけであり、
EP2では最初から最後まで青のライトセーバーを使用していたはずなのだ。

ジオノーシスでドゥークー伯爵に捕らえられ、自前の青のライトセーバーを没収された状態でコロシアムに繋がれ、
その後現れたジェダイの救援にてジェダイ騎士のセフジェット・ジョソールとニカナス・タスーが
予備のライトセーバーを渡した際、オビ=ワンは青、アナキンは緑のライトセーバーを受け取っていた。
その後のドゥークー伯爵との戦いでオビ=ワンが負傷、アナキンに自分の青セーバーを渡して
アナキンが緑と青のセーバーで二刀流を披露したのだが、恐らくこの描写でバンダイ側が混同し、
EP2版のオビ=ワンが緑のライトセーバーを使っている写真を掲載する、というミスを犯したのだと推測する。

EP1版のオビ=ワンなら緑のライトセーバーを持ってても別にいい。だがEP2とEP3は青オンリーじゃなきゃ…。
何と言うか、こういうミスがあるとフィギュアーツ開発陣はちゃんと映画を見ているのか不安になる。
14人のお客様がこれが役に立ったと考えています
レポート
2016年11月6日に日本でレビュー済み
Amazonで購入
C3POの顔がおもしろいですw
ほぼネタとして飾っています。^^
1人のお客様がこれが役に立ったと考えています
レポート
2019年11月10日に日本でレビュー済み
Amazonで購入
カラーリングと3POの頭部の追加以外は以前と同じ仕様。相変わらずライフルを上手く握らせる事が出来ず、すぐに脱落してしまう。
2017年3月6日に日本でレビュー済み
Amazonで購入
商品よく受けた。満足します。やや弱く見える感があるが、気をつければなるでしょう。楽しく素敵なショッピングがなりましたね。
2人のお客様がこれが役に立ったと考えています
レポート
2019年1月4日に日本でレビュー済み
再現性の高い精巧な出来で気に入ってますが、単体で自立させるのが結構大変。
あと、手の関節が外れやすいので、ブラスターを構えたポーズを作るのに神経使います。
まあ、それを差し引いてもスクリーンで観たそのままの姿が再現できるので気に入ってます。
2017年5月6日に日本でレビュー済み
Amazonで購入
特にほしかったというよりも安かったので購入したのですが、
なんとも頼りない感じです。
まあ再現性が高いということなんでしょうけど、
関節が、あっちが取れ、こっちが取れ、ブラスターを手に持たせようにも
手のパーツが取れ、そっちを直してると方が取れ、肘が取れと、
とりあえず持たせるのにかかった時間5分。
ビークルモデルのプラモデルならその時間で作り終わりますね。
で、立たせてみたら、いちおう立つけど、倒れやすい。
これも細くてヒョロヒョロなので仕方ないけど、自立で展示は厳しいかな。
小さいとかいろいろ言われてますが、サイズとか形とかは問題ないと思います。
関節がものすごく取れやすいところだけが、マイナスの理由です。
それだけで★2個減らしたくなるくらい、関節ヤバいです。
リニューアルとか書かれている方いますが、リニューアルじゃなく、単に色変えただけで、
いうなればバージョン違いだと思います。
「リニューアル」というのは完全に同じ商品を改良なり再構築して出す場合なので。
ちょくちょく安くなっているようなので、2千円代なら、買ってもいいかもしれませんね。
2人のお客様がこれが役に立ったと考えています
レポート
2019年2月20日に日本でレビュー済み
Amazonで購入
フィギュアのできは相当いいです。しかし手足の可動部分がゆるくふにゃふにゃでまず銃を持たせることがものすごい難易度高いです。さらに華奢な足なのでバランスが取りづらいのでたたせることも高難易度…。なにか立たせたりするために台座のパーツなどを自分で購入しないと息でも倒れるレベルにしかたたせることができません…。見た目はいいのに残念…
2017年4月29日に日本でレビュー済み
Amazonで購入
サイズが小さい
なんか腕とか足とか細すぎるので脆い感じがある
塗装とか汚れの表現は良かったです
定価で買うのはちょっとおすすめは出来ませんね
1人のお客様がこれが役に立ったと考えています
レポート

他の国からのトップレビュー

すべてのレビューを日本語に翻訳
Graham Swearingen
5つ星のうち5.0 Bandai Tamashii Nations S.H. Figuarts Star Wars: Episode II Attack of The Clones Battle Droid (Geonosis Variant)
2016年11月13日にアメリカ合衆国でレビュー済み
Amazonで購入
Another Battle Droid release from S.H. Figuarts, but a Geonosis variant. Hey I've got issues with Episode II Attack of the Clones, but I really enjoyed the animated Clone Wars shorts and then the cgi Clone Wars show, so I love Clone Troopers and Battle Droids. I've no issue getting a variant repaint. And this does come with an extra accessory (though from one of the worst Star War scenes). So what's in the box?

Battle Droid (Geonosis rust color paint)
Extended backpack antenna
C-3PO Alternate head
E-5 Blaster rifle

This sculpt and articulation is identical to the previously released Battle Droid, but I prefer this Geonosis variant. It's still a pain in the ass to get this figure to hold the rifle, just like the last version, but other than that the articulation for a figure so thin is actually really good. I love all the slight weathering in the paint, and even though I hated the scene where Threepio gets his head removed and placed on a Battle Droid body in the Droid Factory on Geonosis, this head sculpt is fantastic. Bandai nailed the C-3PO face, the proportions and everything, nicely done. This figure is currently really cheap too, so great for anyone who wants to army build. This figure comes FULLY APPROVED.
カスタマー画像
Graham Swearingen
5つ星のうち5.0 Bandai Tamashii Nations S.H. Figuarts Star Wars: Episode II Attack of The Clones Battle Droid (Geonosis Variant)
2016年11月13日にアメリカ合衆国でレビュー済み
Another Battle Droid release from S.H. Figuarts, but a Geonosis variant. Hey I've got issues with Episode II Attack of the Clones, but I really enjoyed the animated Clone Wars shorts and then the cgi Clone Wars show, so I love Clone Troopers and Battle Droids. I've no issue getting a variant repaint. And this does come with an extra accessory (though from one of the worst Star War scenes). So what's in the box?

Battle Droid (Geonosis rust color paint)
Extended backpack antenna
C-3PO Alternate head
E-5 Blaster rifle

This sculpt and articulation is identical to the previously released Battle Droid, but I prefer this Geonosis variant. It's still a pain in the ass to get this figure to hold the rifle, just like the last version, but other than that the articulation for a figure so thin is actually really good. I love all the slight weathering in the paint, and even though I hated the scene where Threepio gets his head removed and placed on a Battle Droid body in the Droid Factory on Geonosis, this head sculpt is fantastic. Bandai nailed the C-3PO face, the proportions and everything, nicely done. This figure is currently really cheap too, so great for anyone who wants to army build. This figure comes FULLY APPROVED.
このレビューの画像
カスタマー画像 カスタマー画像 カスタマー画像 カスタマー画像 カスタマー画像 カスタマー画像 カスタマー画像
カスタマー画像カスタマー画像カスタマー画像カスタマー画像カスタマー画像カスタマー画像カスタマー画像
7人のお客様がこれが役に立ったと考えています
レポート
Frankenstyle
5つ星のうち5.0 Super impressed by this figure
2018年1月25日にアメリカ合衆国でレビュー済み
Amazonで購入
Super impressed by this figure. I'm no fan of the prequels, but my collection didn't feel right without at least a battle droid. For being so light and skeletal as a sculpt it has excellent detail and articulation. Very much worth it.
1人のお客様がこれが役に立ったと考えています
レポート
Jaime
5つ星のうち5.0 Awesome Battle Droid
2017年2月11日にアメリカ合衆国でレビュー済み
Amazonで購入
Great figure. I have several. They are very well articulated and hilarious in the right poses. They are a must to complete your Ep II battle scenes.
カスタマー画像
Jaime
5つ星のうち5.0 Awesome Battle Droid
2017年2月11日にアメリカ合衆国でレビュー済み
Great figure. I have several. They are very well articulated and hilarious in the right poses. They are a must to complete your Ep II battle scenes.
このレビューの画像
カスタマー画像
カスタマー画像
2人のお客様がこれが役に立ったと考えています
レポート
Chad
5つ星のうち3.0 You're better off with black series
2019年1月23日にアメリカ合衆国でレビュー済み
Amazonで購入
A new black series version of this droid is coming out this year. I will buy it even though I own this one. While the sculpt is nice the product is not very well built at all. Parts fall off and it doesn't stand. The hands are weak and can't grip the blaster well. It's annoying. I love the look of it and it is fully articulated, but it just isn't as well constructed as the black series. This is especially annoying given the higher price.
1人のお客様がこれが役に立ったと考えています
レポート
David Y.
5つ星のうち4.0 Great figure, with a few caveats.
2017年2月25日にアメリカ合衆国でレビュー済み
Amazonで購入
Ever since The Phantom Menace first came out, in my youth, I've always wanted a figure of one of these battle droids. It was one of the few designs from the Star Wars prequels that I really liked. So when I saw this available for a pretty reasonable price (below fifty bucks), I decided to order one. But shortly placing my order, I became aware of apparent quality control issues with more recent Figuarts figures, especially this one--I've seen reviews where one of the torso bars was molded so that it was misshapen, forcing the figure to stand in a certain way. Thanks to the seller Arigato Shop, however, I received a specimen without any glaring irregularities. Their diligence is sincerely and very much appreciated.

This is my first Figuarts figure, ever, and I have to say that it has left me with a very favorable first impression. The sculpt is excellent, incorporating the articulation very well. The paint applications are meticulous--I haven't spotted any slop. The figure is very light and well-balanced, which I find to be a plus--based on my own experiences, I hypothesize that this will mean that the figure will hold poses well, even in the long term. I've had too many heavier figures fall over because their joints became loose, over time. On the other hand, a stiff breeze may very well bring the battle droid down, anyway.

There are a few (minor) issues with this figure, however.

First of all, the digits clip together, and the most distal digits tend to pop off if you're not extremely careful. The thumbs, however, are solid single pieces, and connect to the hand via ball-and-socket joints. Posing the battle droid with the blaster can try one's patience, with how fiddly the digits are.

Second, the elbow joints have a limited range of movement when it comes to flexing the arm, adducting the forearm to the upper arm. This means that, when holding the blaster with two hands, the figure is limited to (admittedly) film-accurate "shooting-from-the-hip" poses. This is just a personal quibble.

Third, you'll want to check behind the shiny backing, inside the box, for the illustrated instructions. Abducting the battle droid's arms away from its torso requires you to unfasten a shoulder piece, first--otherwise, the arm will pop off. This can make posing or repositioning the battle droid a bit of a chore. The instructions will also tell you how to put the battle droid into the folded-up "storage" pose, as seen in The Phantom Menace. I haven't tried it, myself, yet, but it's still pretty cool that the figure can do it.

In spite of these flaws, I'm glad I bought this figure for the price I did--it looks great, it's well-articulated, and it poses pretty well. Plus, as I've already mentioned, I love the design. Would I recommend it? That depends on the price and how lucky you're feeling with regards to the quality control issues. Would I want more than one, to "army-build"? Definitely not. Even if I had the money to buy a fireteam of these, the fiddly nature of the figure would suck the enjoyment out of posing multiple figures. Furthermore, the possibility of winding up with disfigured battle droids makes this idea even less attractive.
4人のお客様がこれが役に立ったと考えています
レポート