品番 | 650221 |
---|---|
個数 | 1 |
電池使用 | いいえ |
電池付属 | いいえ |
主な素材 | プラスチック |
対象性別 | ユニセックス |
メーカー推奨年齢 | 15歳以上 |
メーカー保証 | なし |
発売日 | 2023/3/11 |
商品モデル番号 | 650221 |
製品サイズ | 20 x 31 x 13 cm; 480 g |
ASIN | B0BGNBZ15L |
詳細はこちら
「おすすめ出品」の要件を満たす出品はありません
以下のような出品が「カートに入れる」ボタンが付いた「おすすめ出品」として取り扱われます。
- 競争力のある価格設定
- 信頼できる配送オプション
- 満足度の高い顧客サービス
BANDAI SPIRITS(バンダイ スピリッツ) フィギュアライズスタンダード アンプリファイド 遊☆戯☆王デュエルモンスターズ 青眼の白龍 色分け済みプラモデル
ブランド | BANDAI SPIRITS(バンダイ スピリッツ) |
対象年齢 | 大人 |
色 | グレー |
テーマ | コミック |
漫画のキャラクター | 遊戯王 |
この商品をチェックした人はこんな商品もチェックしています
商品の情報
詳細情報
登録情報
おすすめ度 |
5つ星のうち4.6 |
---|---|
Amazon 売れ筋ランキング | - 16,478位ホビー (ホビーの売れ筋ランキングを見る) - 427位トレーディングカード用スリーブ |
Amazon.co.jp での取り扱い開始日 | 2022/10/3 |
ご意見ご要望
商品の説明
『遊☆戯☆王 デュエルモンスターズ』屈指の人気モンスター、ブルーアイズ・ホワイト・ドラゴンがFigure-rise Standard Amplifiedシリーズにて立体化!
■プラモデル独自の新解釈デザインアレンジでキャラクターの魅力を“増幅"。
■成形色はメタリックブルーを採用し、キャラクターに宿る神秘的な魅力を最大限に引き出すことに成功。
■片翼だけで約265mmにもなる、巨大な両翼には関節軸を搭載。
■翼膜には軟質素材を使用。グラデーション印刷が施され、角度・ポージング等によりさまざまな色調変化を楽しむことができる。
■腕部、脚部の各関節には可動軸を採用。ドラゴンの独特なアウトラインを再現しつつ広域な可動を実現。
■首と尾は、節に合わせたパーツ分割とリード線の内蔵により、生命を感じさせるしなやかな動きを実現。“しなり"や“ひねり"の動きでもフォルムを崩さない。
■頭部は顎と舌の可動により、ポージング時の表情付けが可能。口内は成形色で色分け。
■ポージングの幅を広げる2種のディスプレイ用ジョイントパーツが付属。
ブランド紹介
バンダイスピリッツ プラモデルストア
メーカーによる説明
「遊戯王」出でよ、青眼の白龍(ブルーアイズ・ホワイト・ドラゴン)!
遊☆戯☆王デュエルモンスターズ』屈指の人気モンスター、ブルーアイズ・ホワイト・ドラゴンがFigure-rise Standard Amplifiedシリーズにて立体化!
【付属品】
■ディスプレイベース×1式
■ディスプレイ用ジョイントパーツ×2種
■リード線×1
大迫力のスケール感のより、劇中の青眼の白龍を再現しよう。
片翼だけで約265mmにもなる、巨大な両翼には関節軸を搭載。
翼膜には軟質素材を使用。グラデーション印刷が施され、角度・ポージング等によりさまざまな色調変化を楽しむことができる。
首と尾は、関節に合わせたパーツ分割とリード線を内蔵
生命を感じさせるしなやかな動きを実現。“しなり”や“ひねり”の動きでもフォルムを崩さない。
顎が可動し、口を閉じたポージングが可能。
頭部は顎と舌の可動により、ポージング時の表情付けが可能。口内は成形色で色分け。
ポージングの幅を広げる2種のディスプレイ用ジョイントパーツが付属。
BANDAI SPIRITS 「遊戯王」関連プラモデルラインナップ
ULTIMAGEAR 千年パズル | ULTIMAGEAR 黄金櫃 | フィギュアライズスタンダード アンプリファイド 青眼の白龍 |
---|---|---|
スケール1/1スケール | スケール1/1スケール | スケールノンスケール |
発売年月2021年8月 | 発売年月2022年2月 | 発売年月2023年3月 |
年齢に関する情報
対象年齢: 15 歳Amazon.co.jp の推奨年齢:
特定の情報をお探しですか?
イメージ付きのレビュー
-
トップレビュー
上位レビュー、対象国: 日本
レビューのフィルタリング中に問題が発生しました。後でもう一度試してください。
組み立てるだけでも十分な存在感と満足感を得られるでしょう
このシリーズには大いに期待しています
台座なしでも爪のおかげで自立するので自由に飾れる。
ただ、結構大きく翼も折り畳めないので置き場所が狭いとスペースをかなり取られる。
台座なしでも爪のおかげで自立するので自由に飾れる。
ただ、結構大きく翼も折り畳めないので置き場所が狭いとスペースをかなり取られる。
説明書も親切で迷う事はあまり無いでしょう。
一部迷いましたが大丈夫でした。
ただ、艶々にしているせいかランナーが大変硬く、
太いランナーを切る時は注意が必要です。
パチンという音よりもバキンッという感じの音がします。
パーツと隣接したランナーをいきなり切るのは控えましょう。
結果的に抉ってしまいます。
なので、ある程度ランナーを残しあとはヤスリで地道に削るのが良いかもしれません。
私は何も考えずに購入した為、作成後飾る場所を探すのに苦労しました。
プラモ自体はとてもいいものですが、
これから購入される方は飾る場所を決めてから購入された方がいいと思います。
ただ、羽の可動部分が渋いかもしれません。
他の国からのトップレビュー
This is the second amplified I ever put together and both are really nice. Other was a Black Wargreymon. I will say it is lacking in color variety, but all the details of the surface and structure are so cool. If you are putting this together, be careful of how pokey it is.
TIP:
-One other thing to be carefull about is cutting the wire that comes with it. Cut one at only 105mm and the other at 225. The Insturctions weren't 100% clear and I had to lookup. Inexperienced people might cut it at wrong length.
-Remove pieces from the frames as you need in the progress along with the instructions.
PROS:
-This is definitely a very cool model. Looks sharp.
-Very articulate, I will definietely get 2 more and have them in different poses.
-Has alternate replacable parts for the stand so it does not have to stand by itself nor will you need to get a special stand.
-NO Macro sized stickers.
CONS:
-I dont know much much about model kits.
-If shaken hard, wings sag. Not much of a con and since it doesnt move it wont sag.
-One tiny interconnectable portrusion broke, but I was happy that it was a crazy tiny piece so I used superglue and be careful to not drop any of the clear pieces.
-Few Very Tiny pieces, be very careful handling them, perhaps a large table with edges.
Overall It's something I wish I had as a kid and it was easier than the Black Wargreymon. I will eventually get 2 more of these and a Seto Kaiba Figure and an Obelisk Figure, maybe some special effects pieces for figures for the white lightning.
2023年11月7日にアメリカ合衆国でレビュー済み
This is the second amplified I ever put together and both are really nice. Other was a Black Wargreymon. I will say it is lacking in color variety, but all the details of the surface and structure are so cool. If you are putting this together, be careful of how pokey it is.
TIP:
-One other thing to be carefull about is cutting the wire that comes with it. Cut one at only 105mm and the other at 225. The Insturctions weren't 100% clear and I had to lookup. Inexperienced people might cut it at wrong length.
-Remove pieces from the frames as you need in the progress along with the instructions.
PROS:
-This is definitely a very cool model. Looks sharp.
-Very articulate, I will definietely get 2 more and have them in different poses.
-Has alternate replacable parts for the stand so it does not have to stand by itself nor will you need to get a special stand.
-NO Macro sized stickers.
CONS:
-I dont know much much about model kits.
-If shaken hard, wings sag. Not much of a con and since it doesnt move it wont sag.
-One tiny interconnectable portrusion broke, but I was happy that it was a crazy tiny piece so I used superglue and be careful to not drop any of the clear pieces.
-Few Very Tiny pieces, be very careful handling them, perhaps a large table with edges.
Overall It's something I wish I had as a kid and it was easier than the Black Wargreymon. I will eventually get 2 more of these and a Seto Kaiba Figure and an Obelisk Figure, maybe some special effects pieces for figures for the white lightning.
2023年10月10日にメキシコでレビュー済み
2023年7月23日にスペインでレビュー済み
2023年5月23日にドイツでレビュー済み