Brand | DecoArt |
---|---|
Color | Clear |
Finish Type | Gloss |
Size | 8 Fl Oz (Pack of 1) |
Item Volume | 8 Fluid Ounces |
Special Feature | Crack Resistant |
Unit Count | 8.0 Fl Oz |
Specific Uses For Product | Exterior |
Indoor/Outdoor Usage | Outdoor |
Item Form | Liquid |
Age Range (Description) | Adult |
Package Information | Can |
Color Code | #00000 |
Coverage | Partial |
Manufacturer | DecoArt |
Part Number | 268332 |
Item Weight | 0.16 ounces |
Product Dimensions | 2.81 x 2.81 x 3.25 inches |
Item model number | TG01-36 |
Is Discontinued By Manufacturer | No |
Style | 8 fl oz |
Finish | Gloss |
Material | Ceramic |
Shape | Round |
Item Package Quantity | 1 |
Special Features | Crack Resistant |
Batteries Included? | No |
Batteries Required? | No |
Battery Cell Type | Alkaline |
Warranty Description | N. |
Other Sellers on Amazon
86% positive over last 12 months
Image Unavailable
Color:
-
-
-
- To view this video download Flash Player
- 3 VIDEOS
DecoArt Triple Thick Gloss Glaze - Jar, 8fl oz
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Purchase options and add-ons
Brand | DecoArt |
Color | Clear |
Finish Type | Gloss |
Size | 8 Fl Oz (Pack of 1) |
Item Volume | 8 Fluid Ounces |
Special Feature | Crack Resistant |
Unit Count | 8.0 Fl Oz |
Specific Uses For Product | Exterior |
Indoor/Outdoor Usage | Outdoor |
Item Form | Liquid |
About this item
- Non-toxic
- Can be used on wood, wicker, plaster, paper mache, resins, painted china, pre-primed metal, pie cones, jewelry, bisque and artificial flowers
- Goes on smoothly with no stroke marks
- Because it is extra thick, only one coat is needed for most surfaces
- Finish adds the illusion of depth
- This product is not intended for outdoor use and is not heat resistant
Customer ratings by feature
Frequently bought together
Compare with similar items
This Item DecoArt Triple Thick Gloss Glaze - Jar, 8fl oz | Recommendations | dummy | dummy | dummy | dummy | |
Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | |
Price | $11.99$11.99 | -13% $6.98$6.98 List: $7.99 | $18.99$18.99 | -37% $7.30$7.30 List: $11.64 | $29.51$29.51 | $34.99$34.99 |
Delivery | Get it as soon as Sunday, Mar 31 | Get it as soon as Sunday, Mar 31 | Get it as soon as Sunday, Mar 31 | Get it as soon as Sunday, Mar 31 | Get it Apr 1 - 3 | Get it as soon as Sunday, Mar 31 |
Customer Ratings | ||||||
Adhesion | 4.6 | 4.6 | 4.6 | 4.5 | — | 5.0 |
Easy to use | 4.6 | 4.7 | 4.5 | 4.5 | — | 4.8 |
Sheerness | 4.5 | 4.3 | 4.5 | 4.4 | — | 4.8 |
Value for money | 4.5 | 4.3 | 4.3 | 4.4 | — | — |
Durability | 4.5 | 4.8 | 5.0 | 4.4 | — | — |
Sold By | IJ Trading INC | Amazon.com | Buckeye Trading | Amazon.com | B-JPN | L.A GLOBAL STORE |
volume | 8 fluid ounces | 12 fluid ounces | 8 fluid ounces | 12 fluid ounces | 2 fluid ounces | 8 fluid ounces |
unit count | 8 | 24 | 16 | 12 | 2 | 3 |
paint type | — | Spray | — | Spray | Enamel | — |
surface suggestion | — | Ceramic,Glass,Metal,Paper,Plastic,Wood | Ceramic | Wood, Metal, Plastic, Paper Mache, Glass, Plaster, Ceramic, Dried Silk Flowers, Paper, Wicker | — | — |
exterior finish | — | Metal,Plastic | — | Metal,Plastic | Gloss | — |
Top rated similar items
- Decoart Americana DuraClear Varnish 8oz High Gloss, 8 Fl Oz (Pack of 1), BlueAmazon's Choicein Household Polyurethanes, Shellac & Varnish15% offLimited time dealFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Sunday, Mar 31
- DecoArt DS19-9 American DuraClear Varnishes, 8-Ounce, DuraClear Gloss VarnishAmazon's Choicein Art PaintsFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Sunday, Mar 31
- Golden Acryl Med 8 Oz Glaze Liquid SatinFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Sunday, Mar 31
- FolkArt Multi-Surface Dragonfly Glaze Multi-Surface Paint (2 oz), 44385, Green-Gold-RedAmazon's Choicein Paint Finishes16% offEnds in 15:17FREE Shipping on orders over $35 shipped by AmazonGet it as soon as Sunday, Mar 31
- DecoArt Dazzling Metallics 2-Ounce Venetian Gold Acrylic PaintFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Sunday, Mar 31
From the brand
DecoArt
Art is joy. Art is community. Art brings us together.
-
Our journey started in 1985 in Central Kentucky. For over 35 years, we have been perfecting how to make the best acrylic art supplies we can. Over three decades of experience has taught us a lot, the kind of knowledge and expertise that you just can't get any other way. We are proud of our products that have stood the test of time.
-
Are your paints dishwasher-safe?
Some of our brands are formulated to allow them to be baked to become dishwasher safe. Follow the instructions on Americana Multi-Surface Satin, DecoArt Glass Paint, DecoArt Gloss Enamels, and Americana Decor Chalky Finish for glass to make these products dishwasher-safe.
What paints can I use outside?
Our Patio Paint Outdoor and Americana Multi-Surface Satin paints are formulated to work well outside without the need for a sealer.
Where are your products made?
Our paints and mediums are formulated, tested, bottled, and labeled in our factory in the U.S.A.
-
-
-
-
-
Product Description
Videos
Videos for this product
0:16
Click to play video
Customer Review: The Worst Glaze I Have Ever Used
christina
Videos for this product
1:50
Click to play video
Customer Review: Not suggested for large canvas pour paintings
Debra Fox
Videos for this product
0:44
Click to play video
DecoArt - Triple Thick
DecoArt
Product information
Technical Details
Additional Information
ASIN | B000WWM6QM |
---|---|
Customer Reviews |
4.6 out of 5 stars |
Best Sellers Rank | #1,058 in Arts, Crafts & Sewing (See Top 100 in Arts, Crafts & Sewing) #1 in Ceramics Glazes |
Date First Available | October 7, 2007 |
Warranty & Support
Feedback
Looking for specific info?
Related Posts
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers like the performance, appearance, water resistance, ease of use, and smoothness of the toy. For example, they mention it does the trick, it gives a nice glossy finish, and it dries super quick. That said, they say it's easy to apply and spread.
AI-generated from the text of customer reviews
Customers are satisfied with the performance of the product. For example, they mention it works okay, it's perfect in every way, and it'll do the trick.
"Need a high gloss finish for small projects? This works wonderful! Dries hard and super high gloss finish. Good depth if you do multiple coats." Read more
"...I used it to seal in a desk I covered in strickers, and it worked so good." Read more
"...Ughh...not exactly what i was expecting to do.Otherwise, it's nice and shinny, but to get the effect i was expecting i'd have to apply many..." Read more
"...The resin pieces pictured in my review are from that year. Amazing stuff, hasn't yellowed!!..." Read more
Customers like the appearance of the product. For example, they mention it's easy to apply, gives a nice glossy finish, and makes their paintings look great. Some say that it helps their first mosaic necklace shine and gives the painted beads a ceramic glazed appearance. Overall, customers are satisfied with the appearance and recommend it to others.
"...It was easy to apply. Does dry super clear. Looks awesome. I honestly thought I was gonna have major issues using this, but didn't! Dried quick too...." Read more
"This stuff is my new favorite, when dry it still looks shiney and wet, its about 5$more than modpodge gloss but so worth the extra money." Read more
"...Otherwise, it's nice and shinny, but to get the effect i was expecting i'd have to apply many coats...." Read more
"...Pros: gives a very shiny, glass-like finish, self-leveling so a very smooth surface can be achieved, product dries to a nice hard finish...." Read more
Customers like the water resistance of the product. They say it dries super quick, clear, and has an amazing result once dry. Some say it's not very sticky, and it glazed their air dry clay pretty fast. It's waterproof and heat resistant once dried, and is water soluble, making it easy to clean brushes with just water.
"Need a high gloss finish for small projects? This works wonderful! Dries hard and super high gloss finish. Good depth if you do multiple coats." Read more
"...Dried quick too. I used it to seal in a desk I covered in strickers, and it worked so good." Read more
"...] TL,DR: product was thicker than anticipated, surface dried very fast, used more than I thought I would need to, product is self-leveling, I..." Read more
"...Smells kinda bad though. But easy to apply and has an amazing result once dry." Read more
Customers find the product easy to apply and build-up if desired. They mention it goes on easy with a soft brush and there is no way to mess up. Customers also say it's way easier than a resin finish and it cures beautifully.
"I literally love this product. It was easy to apply. Does dry super clear. Looks awesome...." Read more
"So glossy and shiny. Smells kinda bad though. But easy to apply and has an amazing result once dry." Read more
"Goes on very easy and yes it’s very thick so don’t over brush it like paint. Dries fast to touch within a couple of hours. Great finish high gloss...." Read more
"...He did a great job. The glaze was easy to apply and needed very little to make it look shiny. It dried quickly and had great sheer...." Read more
Customers are satisfied with the smoothness of the top coat. They mention that it is super glossy, has a very good sheen, and is a great sealer. It gives a shiny, glass-like finish, and it is really good multiuse gloss. It makes sure wood projects are shiny and secure.
"...This works wonderful! Dries hard and super high gloss finish. Good depth if you do multiple coats." Read more
"...I tested triple thick with a small paint brush= streaks..bigger brush= smooth, no streaks...." Read more
"...Pros: gives a very shiny, glass-like finish, self-leveling so a very smooth surface can be achieved, product dries to a nice hard finish...." Read more
"So glossy and shiny. Smells kinda bad though. But easy to apply and has an amazing result once dry." Read more
Customers are mixed about the seal. Some mention it's great to seal anything, including diamond paintings. They say it'd be a better sealer than some other similar products. However, some customers report that the seal arrived damaged with leaked content.
"...I like that this product is thick and appears to seal and strengthen the air dry clay, but I was wishing to get a smoother surface." Read more
"...in box of other stuff I had purchased from Amazon and the contents had dripped out and hardened on the jar and on other stuff in the box...." Read more
"This is a great way to seal and glaze your DIY project." Read more
"A great product to seal your diamond paintings. I will only use this product." Read more
Customers are mixed about the thickness of the glaze. Some mention it's super thick and glossy, while others say it'll get noticeably thicker when you open the jar.
"TL,DR: product was thicker than anticipated, surface dried very fast, used more than I thought I would..." Read more
"...a two part resin, it takes 3 days to harden, and it is sightly thicker than triple thick, and you don't get much time to make sure it is all even..." Read more
"...I like that this product is thick and appears to seal and strengthen the air dry clay, but I was wishing to get a smoother surface." Read more
"Goes on very easy and yes it’s very thick so don’t over brush it like paint. Dries fast to touch within a couple of hours. Great finish high gloss...." Read more
Customers are mixed about the value of the product. Some mention it goes a long way, is the cheapest they've ever seen gloss, and is a budget-friendly alternative to Glossy Accents. However, others say that it was more of a pure disaster, disappointed when the price was doubled, and left a weird gross film all over their project.
"...shiney and wet, its about 5$more than modpodge gloss but so worth the extra money." Read more
"...This was cheap and you get alot of it and hardly have to use that much. It has a smell but nothing that you have to use outside or anything." Read more
"...The first night, I didn't do this, and noticed significant loss of product due to the low humidity here (it averages around 9-13%.)...." Read more
"...Definitely worth the money!" Read more
Reviews with images
-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
I will have to seal my rocks first and THEN put the glaze. Ughh...not exactly what i was expecting to do.
Otherwise, it's nice and shinny, but to get the effect i was expecting i'd have to apply many coats. Not such a difference from other brands and coats.
Reviewed in the United States on August 23, 2023
6/4/2023. Please read the addition to the review at the end, so you don’t make the mistake I did!
This product does give a nice glassy sheen. I used it to seal in glitter on a MacBook Pro case (see photo/video.) I had used several coats of glossy Mod Podge prior, but the coverage was terrible, and the surface never became very shiny. I then tried a couple of coats of Golden Heavy Gel Gloss because I had some on hand. The coverage was better, but every brush stroke was visible in the surface, and the finish was still not glossy.
I was considering using resin (or something like Varathane) as I wanted glossiness that would be a very "present" layer, very shiny- like the finish on a surfboard, or an electric guitar. I wanted however to use a water-based product. I am very solvent-sensitive, and don't really have anywhere to work that has decent ventilation, and I have cats, so I decided to try something else prior to committing to resin.
The reviews for this product on Amazon were mixed, but the majority seemed to be pretty positive. This wasn't an expensive product, and after I checked out the photos and the video of its performance (thanks, guys!), I ordered it.
The product arrived intact. The container was not cracked, or broken, or leaking. It was just sitting in its little box, with nothing wrong with it at all. The jar of product was completely full, with the (styrofoam?) sealing layer on the top completely intact, and adhered firmly to the plastic jar beneath it. The product had clearly never been used.
After opening it, I tilted the jar slightly to examine the flow of the product. I could tell this stuff was VERY viscous. I had a thought to thin it out with water, but I didn't do this, as I needed to see how this stuff behaved when it was used straight out of the jar.
Its viscosity created a usage learning curve. I found that using a dry, artificial bristle brush (I paint in acrylic, so I have a lot of these around) worked the best to apply it. I used a brush that was about an inch and a quarter wide. I didn't want to use anything too wide to get into the jar comfortably. Make sure to use a dry brush- excess water on your brush will fall into the product and mess up your finish.
I found also that loading up the brush with a *lot* of glaze made for a more successful application. A lighter load of product on the brush resulted in brush strokes showing, and a streaky finish.
The first layer ended up going on a lot thicker than I had anticipated, due to how viscous the product is. Again- if you don't load up the brush, if you are covering a large surface area, with a decent amount of product, your brush is going to run out of product quickly, and the finish is going to show brush strokes. This would not apply if you are glazing smaller objects, where a lesser quantity of glaze is required to cover the object, and you have more control over the application.
This product is self-leveling. After the initial layer, a lot of brush strokes and imperfections in the prior coatings were still visible. I left the project alone to dry, and brush strokes visible the night before had diminished after a night of drying. Each subsequent coat created a smoother surface, as the glaze filled in the imperfections.
After the second coat (I wanted a really built-up, shiny finish, and one layer didn't do this) was drying, I was alarmed to see hazy white places in the finish. When I checked these areas about an hour later, they were still there. However, after I left the MacBook case to dry again overnight, these hazy whitish places were gone. They were probably thicker areas that were showing moisture suspended in the product. Regardless, by the morning, they had vanished, and the finish was very shiny, showing only a few brushstrokes.
I was quite relieved that I had no trouble with bubbles showing up in the finish (although there is one bubble in the photo, if you look closely- but that was an isolated incident.) I was actually surprised at the lack of bubbles. Of course, if you move your brush too fast, or scrub it back and forth across the surface, you will get bubbles in any glaze. But this glaze, for me, was bubble-free.
I keep mentioning this, but I think this glaze is the most viscous I have ever worked with. It is THICK. By the third coat, I had started to figure out the best way to handle it, really loading up my brush, using slow, steady brush strokes, and found it a lot easier to work with.
The photo was taken shortly after the third coat was applied. You can see some of that whitish haziness in some areas. I had let the MacBook cover dry for 48 hours before I shot the video. The video actually doesn't capture how shiny the finish really is.
I had had a lot of flawed finishes to cover from the prior coatings, so perhaps if I had started glazing initially with the DecoArt Triple Glaze, I would not have had to use three coats. Or because I was going for a resin-like, super shiny finish, I might have needed to use multiple coats after all: I don't know.
Looking at my project now, I am quite pleased with it. It's not "cured" dry yet (it was by the video) but the surface is *very* shiny. I may put on one more coat just to really get that surfboard/electric guitar depth of glossiness. It actually has that kind of finish right now, but I need to let it dry over night to see if it even needs another coat. (I just checked it again, and it looks like three coats are going to be enough. It's beautifully reflective.)
I live in a very arid state, so I must emphasize this: make sure the jar is always firmly closed. And if you live in a drier part of the country, I would store the jar in the following way. Make sure the jar is closed tightly, then put the jar into a plastic bag, wrap the excess of the bag around the jar, and secure the plastic bag around the jar with a rubber band, wrapped tight. The first night, I didn't do this, and noticed significant loss of product due to the low humidity here (it averages around 9-13%.). If I open it again, and notice even more evaporation, I am going to put a damp paper towel into the plastic bag with the product, then close it up with the rubber band when storing it. Yes, I know that sounds weird, but
evaporating art supplies = a waste of a lot of money.
I am probably going to try thinning the product with water after I finish with this project- I’ve used about half of the product- and use it to glaze an acrylic or gouache painting as a test. I love a high shine gloss on my paintings, and my favorite product to achieve this is Golden Polymer Medium Gloss. Unfortunately, my budget does not allow me to purchase that product right now, so I am very glad that I found the DecoArt Glaze. I'll have to see how it performs on flexible substrates like canvas and watercolor and printmaking paper. I'm sure it will work great.
I just wish it came in a larger size- like a gallon!
This product does give off an acrylic paint/acrylic medium low odor- like very very weak ammonia. Any smell/fumes were easily dispersed with a small table fan, and I did not get a headache as I usually do. I am very solvent-sensitive after many years of working around volatile solvents.
Cons: product is super viscous, jar is too small, used more product than anticipated due to needing to cover a prior flawed surface, product has very fast evaporation rate, will ruin your brush in the blink of an eye.
Pros: gives a very shiny, glass-like finish, self-leveling so a very smooth surface can be achieved, product dries to a nice hard finish.
I would never assume your finish is going to be waterproof, no matter how long it has been since the DecoArt glaze has dried on your project’s surfaces. So if you are planning to store your item(s) glazed with DecoArt outside, like the decorated garden rocks (etc.) either cover it/them in plastic if you think it is going to rain, or put the glazed item(s) under an awning or someplace where moisture cannot get to them.
As with any acrylic painting, if the apparently dry surface is exposed to enough water, the paint and medium can and will soften, and can either peel up, or bubble. First you will see white hazing in the finish to indicate there is moisture/water in that area of the finish. Another test is if you poke the surface with a fingernail and you see a dent that persists- that means the painting is holding on to a lot of moisture.
If you see this, you should set the artwork or project or whatever aside in a completely dry environment immediately, and allow it to dry fully for at least 24 hours- longer, preferably. If you go over an artwork in a "damp" condition with fresh wet media such as a glaze, or with more paint, you run the risk of causing the paint already on the surface to smear, or for layers to loosen and tear off of the surface. If you have any doubts about the project you are planning to glaze, or touch up, being fully dry- leave it to dry as long as possible before glazing it.
Brush care when using product: NEVER leave your brush sitting in product of any kind, but especially in thick, quick-drying mediums like this. Before you know it, the bristles near to the ferrule- the metal "collar" that holds the bristles onto the brush- will have dried stiff. Over time, this contributes to the brush becoming unusable, in a surprisingly quick fashion. Always- ALWAYS- rinse whatever brush you use with this, or any other acrylic paint or medium, in warm water IMMEDIATELY AFTER USING IT. Then put a blob of soap in your palm- I like Dawn- and massage the soap into the bristles. Do this for longer/more times than you think you have to, and then rinse again- for longer than you think you have to. Any tiny residue of product- which is liquid plastic- is going to coat your bristles, and build up, and your brush will start becoming stiff, with the bristles stuck together, and eventually you will have to just throw it away.
This all sounds very remedial, but I have lost many good (and expensive) glazing/paint brushes by thinking "oh- I'll rinse them out in a few minutes." Once acrylic dries into brush hairs, it's there forever. (There are solvents that claim they will "bring your brush back to life" but these do not work, and are EXTREMELY toxic to use.) If you get lazy, realize you are probably just going to have to throw the brush away. I still have brushes from art college, in the early 90s. The longer you use a brush, the more it develops a wear pattern that corresponds with how you use it, and becomes more and more "personalized" by your use of it- like the wear on the nib of a fountain pen. My brushes seem like old friends.
Overall, I am extremely pleased with the performance of the DecoArt Triple Gloss Glaze, and would happily purchase a larger container of it, if it was available. I've been painting for over thirty years, and I have never found a product that creates such a high-gloss, hard finish shine as quickly as this one does. I'm happy I found it, and am always going to keep it around.
Forgot this: even though I was putting thick layers of this product over prior coats of acrylic, there was no crazing or cracking in the surface, at any stage. I’m not saying this product would/will never do this; just that under my particular circumstances, cracks in the surface did not occur.
If I was glazing an acrylic painting with this product, I would try to first make sure the painting was COMPLETELY dry. This is tricky, as an acrylic painting can appear to be totally dry, when it is actually not. Also sometimes you have a client waiting for a piece, so you don’t have the luxury of leaving your paintings to dry for a month, and you need to glaze them just after completion so you can get them to the client.
This is when surface cracking, or smearing or tearing, might occur.
If I did get cracking on the surface of a painting, as some other reviewers did, I would try adding multiple layers of this glaze- letting the re-glazed painting dry at least overnight- to see if the glaze might “fill in” the cracks. I would continue to add layers until the cracks (hopefully) disappeared.
This product also dries *very* hard- harder than any acrylic glaze I’ve ever worked with. So it MIGHT be possible- if the surface is thick enough, and is completely dry- to sand down the cracks, using very fine sandpaper (400-600.) After sanding, let the artwork sit overnight again. Then, add another layer of the DecoArt glaze.
I have not had to deal with the cracking issue, but if a painting’s finish did show cracking, these are the steps I would take to try to fix the situation.
Addendum: 6/4/2023
I hadn’t used this glaze since I wrote the initial review. I had wrapped it in a plastic bag, secured with a rubber band, and put it on a shelf in my studio last year. But before I put it away-- I added some water to it, to ensure the glaze would still be usuable when I needed to use it again.
The only problem is- it is now TOO liquid. I had only added a small bit of water, as the product had been getting very thick, before storing it. I was surprised the small amount of water I had added- less than a teaspoon- had changed it into a runny liquid. It is now a completely differently product from the original, thicker form. It is the consistency of water.
I glazed something with it to test it out, and it still imparted a shiny finish, but the surface, after it dried, was completely crazed. Meaning, the entire surface was covered with what looked like tiny cracks in the coating. This was caused by me having thinned it down, I am certain. The larger volume of water in the product must have increased the evaporation rate, which then compromised the finish.
I just ordered a brand new jar of DecoArt Glaze. I’m going to discard this runny batch, as I still have some polymer medium gloss for glazing that I can use before the DecoArt arrives that I know won’t craze (crack), and will be adequately shiny.
There is nothing on the shelves in my studio that behaves like DecoArt Glaze- that has its viscosity, its hard-drying finish, and its super high shine. I won’t make the mistake again of adding water to it to thin it down, unless I am about to use up the final bit of it in the jar. I’m not sure why, but the weird reaction of the product turning into a runny liquid after the addition of water seemed to happen some time after I put it on the shelf. I won’t take the chance of adding water to it, closing the jar, and storing it, and would advise that you not add water to it and store it. I imagine you could decant a small amount of it and thin that small amount out with some water, but I would not add water to the main supply of product.
I’m looking forward to getting that new jar. The finish I get with DecoArt is unique, and I’m happy it’s on its way.
Thank you!
Reviewed in the United States on September 18, 2022
6/4/2023. Please read the addition to the review at the end, so you don’t make the mistake I did!
This product does give a nice glassy sheen. I used it to seal in glitter on a MacBook Pro case (see photo/video.) I had used several coats of glossy Mod Podge prior, but the coverage was terrible, and the surface never became very shiny. I then tried a couple of coats of Golden Heavy Gel Gloss because I had some on hand. The coverage was better, but every brush stroke was visible in the surface, and the finish was still not glossy.
I was considering using resin (or something like Varathane) as I wanted glossiness that would be a very "present" layer, very shiny- like the finish on a surfboard, or an electric guitar. I wanted however to use a water-based product. I am very solvent-sensitive, and don't really have anywhere to work that has decent ventilation, and I have cats, so I decided to try something else prior to committing to resin.
The reviews for this product on Amazon were mixed, but the majority seemed to be pretty positive. This wasn't an expensive product, and after I checked out the photos and the video of its performance (thanks, guys!), I ordered it.
The product arrived intact. The container was not cracked, or broken, or leaking. It was just sitting in its little box, with nothing wrong with it at all. The jar of product was completely full, with the (styrofoam?) sealing layer on the top completely intact, and adhered firmly to the plastic jar beneath it. The product had clearly never been used.
After opening it, I tilted the jar slightly to examine the flow of the product. I could tell this stuff was VERY viscous. I had a thought to thin it out with water, but I didn't do this, as I needed to see how this stuff behaved when it was used straight out of the jar.
Its viscosity created a usage learning curve. I found that using a dry, artificial bristle brush (I paint in acrylic, so I have a lot of these around) worked the best to apply it. I used a brush that was about an inch and a quarter wide. I didn't want to use anything too wide to get into the jar comfortably. Make sure to use a dry brush- excess water on your brush will fall into the product and mess up your finish.
I found also that loading up the brush with a *lot* of glaze made for a more successful application. A lighter load of product on the brush resulted in brush strokes showing, and a streaky finish.
The first layer ended up going on a lot thicker than I had anticipated, due to how viscous the product is. Again- if you don't load up the brush, if you are covering a large surface area, with a decent amount of product, your brush is going to run out of product quickly, and the finish is going to show brush strokes. This would not apply if you are glazing smaller objects, where a lesser quantity of glaze is required to cover the object, and you have more control over the application.
This product is self-leveling. After the initial layer, a lot of brush strokes and imperfections in the prior coatings were still visible. I left the project alone to dry, and brush strokes visible the night before had diminished after a night of drying. Each subsequent coat created a smoother surface, as the glaze filled in the imperfections.
After the second coat (I wanted a really built-up, shiny finish, and one layer didn't do this) was drying, I was alarmed to see hazy white places in the finish. When I checked these areas about an hour later, they were still there. However, after I left the MacBook case to dry again overnight, these hazy whitish places were gone. They were probably thicker areas that were showing moisture suspended in the product. Regardless, by the morning, they had vanished, and the finish was very shiny, showing only a few brushstrokes.
I was quite relieved that I had no trouble with bubbles showing up in the finish (although there is one bubble in the photo, if you look closely- but that was an isolated incident.) I was actually surprised at the lack of bubbles. Of course, if you move your brush too fast, or scrub it back and forth across the surface, you will get bubbles in any glaze. But this glaze, for me, was bubble-free.
I keep mentioning this, but I think this glaze is the most viscous I have ever worked with. It is THICK. By the third coat, I had started to figure out the best way to handle it, really loading up my brush, using slow, steady brush strokes, and found it a lot easier to work with.
The photo was taken shortly after the third coat was applied. You can see some of that whitish haziness in some areas. I had let the MacBook cover dry for 48 hours before I shot the video. The video actually doesn't capture how shiny the finish really is.
I had had a lot of flawed finishes to cover from the prior coatings, so perhaps if I had started glazing initially with the DecoArt Triple Glaze, I would not have had to use three coats. Or because I was going for a resin-like, super shiny finish, I might have needed to use multiple coats after all: I don't know.
Looking at my project now, I am quite pleased with it. It's not "cured" dry yet (it was by the video) but the surface is *very* shiny. I may put on one more coat just to really get that surfboard/electric guitar depth of glossiness. It actually has that kind of finish right now, but I need to let it dry over night to see if it even needs another coat. (I just checked it again, and it looks like three coats are going to be enough. It's beautifully reflective.)
I live in a very arid state, so I must emphasize this: make sure the jar is always firmly closed. And if you live in a drier part of the country, I would store the jar in the following way. Make sure the jar is closed tightly, then put the jar into a plastic bag, wrap the excess of the bag around the jar, and secure the plastic bag around the jar with a rubber band, wrapped tight. The first night, I didn't do this, and noticed significant loss of product due to the low humidity here (it averages around 9-13%.). If I open it again, and notice even more evaporation, I am going to put a damp paper towel into the plastic bag with the product, then close it up with the rubber band when storing it. Yes, I know that sounds weird, but
evaporating art supplies = a waste of a lot of money.
I am probably going to try thinning the product with water after I finish with this project- I’ve used about half of the product- and use it to glaze an acrylic or gouache painting as a test. I love a high shine gloss on my paintings, and my favorite product to achieve this is Golden Polymer Medium Gloss. Unfortunately, my budget does not allow me to purchase that product right now, so I am very glad that I found the DecoArt Glaze. I'll have to see how it performs on flexible substrates like canvas and watercolor and printmaking paper. I'm sure it will work great.
I just wish it came in a larger size- like a gallon!
This product does give off an acrylic paint/acrylic medium low odor- like very very weak ammonia. Any smell/fumes were easily dispersed with a small table fan, and I did not get a headache as I usually do. I am very solvent-sensitive after many years of working around volatile solvents.
Cons: product is super viscous, jar is too small, used more product than anticipated due to needing to cover a prior flawed surface, product has very fast evaporation rate, will ruin your brush in the blink of an eye.
Pros: gives a very shiny, glass-like finish, self-leveling so a very smooth surface can be achieved, product dries to a nice hard finish.
I would never assume your finish is going to be waterproof, no matter how long it has been since the DecoArt glaze has dried on your project’s surfaces. So if you are planning to store your item(s) glazed with DecoArt outside, like the decorated garden rocks (etc.) either cover it/them in plastic if you think it is going to rain, or put the glazed item(s) under an awning or someplace where moisture cannot get to them.
As with any acrylic painting, if the apparently dry surface is exposed to enough water, the paint and medium can and will soften, and can either peel up, or bubble. First you will see white hazing in the finish to indicate there is moisture/water in that area of the finish. Another test is if you poke the surface with a fingernail and you see a dent that persists- that means the painting is holding on to a lot of moisture.
If you see this, you should set the artwork or project or whatever aside in a completely dry environment immediately, and allow it to dry fully for at least 24 hours- longer, preferably. If you go over an artwork in a "damp" condition with fresh wet media such as a glaze, or with more paint, you run the risk of causing the paint already on the surface to smear, or for layers to loosen and tear off of the surface. If you have any doubts about the project you are planning to glaze, or touch up, being fully dry- leave it to dry as long as possible before glazing it.
Brush care when using product: NEVER leave your brush sitting in product of any kind, but especially in thick, quick-drying mediums like this. Before you know it, the bristles near to the ferrule- the metal "collar" that holds the bristles onto the brush- will have dried stiff. Over time, this contributes to the brush becoming unusable, in a surprisingly quick fashion. Always- ALWAYS- rinse whatever brush you use with this, or any other acrylic paint or medium, in warm water IMMEDIATELY AFTER USING IT. Then put a blob of soap in your palm- I like Dawn- and massage the soap into the bristles. Do this for longer/more times than you think you have to, and then rinse again- for longer than you think you have to. Any tiny residue of product- which is liquid plastic- is going to coat your bristles, and build up, and your brush will start becoming stiff, with the bristles stuck together, and eventually you will have to just throw it away.
This all sounds very remedial, but I have lost many good (and expensive) glazing/paint brushes by thinking "oh- I'll rinse them out in a few minutes." Once acrylic dries into brush hairs, it's there forever. (There are solvents that claim they will "bring your brush back to life" but these do not work, and are EXTREMELY toxic to use.) If you get lazy, realize you are probably just going to have to throw the brush away. I still have brushes from art college, in the early 90s. The longer you use a brush, the more it develops a wear pattern that corresponds with how you use it, and becomes more and more "personalized" by your use of it- like the wear on the nib of a fountain pen. My brushes seem like old friends.
Overall, I am extremely pleased with the performance of the DecoArt Triple Gloss Glaze, and would happily purchase a larger container of it, if it was available. I've been painting for over thirty years, and I have never found a product that creates such a high-gloss, hard finish shine as quickly as this one does. I'm happy I found it, and am always going to keep it around.
Forgot this: even though I was putting thick layers of this product over prior coats of acrylic, there was no crazing or cracking in the surface, at any stage. I’m not saying this product would/will never do this; just that under my particular circumstances, cracks in the surface did not occur.
If I was glazing an acrylic painting with this product, I would try to first make sure the painting was COMPLETELY dry. This is tricky, as an acrylic painting can appear to be totally dry, when it is actually not. Also sometimes you have a client waiting for a piece, so you don’t have the luxury of leaving your paintings to dry for a month, and you need to glaze them just after completion so you can get them to the client.
This is when surface cracking, or smearing or tearing, might occur.
If I did get cracking on the surface of a painting, as some other reviewers did, I would try adding multiple layers of this glaze- letting the re-glazed painting dry at least overnight- to see if the glaze might “fill in” the cracks. I would continue to add layers until the cracks (hopefully) disappeared.
This product also dries *very* hard- harder than any acrylic glaze I’ve ever worked with. So it MIGHT be possible- if the surface is thick enough, and is completely dry- to sand down the cracks, using very fine sandpaper (400-600.) After sanding, let the artwork sit overnight again. Then, add another layer of the DecoArt glaze.
I have not had to deal with the cracking issue, but if a painting’s finish did show cracking, these are the steps I would take to try to fix the situation.
Addendum: 6/4/2023
I hadn’t used this glaze since I wrote the initial review. I had wrapped it in a plastic bag, secured with a rubber band, and put it on a shelf in my studio last year. But before I put it away-- I added some water to it, to ensure the glaze would still be usuable when I needed to use it again.
The only problem is- it is now TOO liquid. I had only added a small bit of water, as the product had been getting very thick, before storing it. I was surprised the small amount of water I had added- less than a teaspoon- had changed it into a runny liquid. It is now a completely differently product from the original, thicker form. It is the consistency of water.
I glazed something with it to test it out, and it still imparted a shiny finish, but the surface, after it dried, was completely crazed. Meaning, the entire surface was covered with what looked like tiny cracks in the coating. This was caused by me having thinned it down, I am certain. The larger volume of water in the product must have increased the evaporation rate, which then compromised the finish.
I just ordered a brand new jar of DecoArt Glaze. I’m going to discard this runny batch, as I still have some polymer medium gloss for glazing that I can use before the DecoArt arrives that I know won’t craze (crack), and will be adequately shiny.
There is nothing on the shelves in my studio that behaves like DecoArt Glaze- that has its viscosity, its hard-drying finish, and its super high shine. I won’t make the mistake again of adding water to it to thin it down, unless I am about to use up the final bit of it in the jar. I’m not sure why, but the weird reaction of the product turning into a runny liquid after the addition of water seemed to happen some time after I put it on the shelf. I won’t take the chance of adding water to it, closing the jar, and storing it, and would advise that you not add water to it and store it. I imagine you could decant a small amount of it and thin that small amount out with some water, but I would not add water to the main supply of product.
I’m looking forward to getting that new jar. The finish I get with DecoArt is unique, and I’m happy it’s on its way.
Thank you!