画面サイズ(インチ) | 40 インチ |
---|---|
対応機種 | モニター, ノートパソコン |
カラー | アルミニウム |
電池付属 | いいえ |
電池使用 | いいえ |
ブランド名 | ERGOTRON |
メーカー | エルゴトロン |
製品型番 | 45-549-026 |
発売年 | 2017 |
付属品 | LXアームとエクステンション x 2。 |
サイズ | 23 Inch Pole |
素材 | アルミニウム |
組立方式 | テーブルトップマウント |
製品サイズ | 43.43 x 44.96 x 75.95 cm; 8.62 kg |
商品重量 | 8.62 kg |
プライム無料体験をお試しいただけます
プライム無料体験で、この注文から無料配送特典をご利用いただけます。
非会員 | プライム会員 | |
---|---|---|
通常配送 | ¥410 - ¥450* | 無料 |
お急ぎ便 | ¥510 - ¥550 | |
お届け日時指定便 | ¥510 - ¥650 |
*Amazon.co.jp発送商品の注文額 ¥3,500以上は非会員も無料
無料体験はいつでもキャンセルできます。30日のプライム無料体験をぜひお試しください。
¥48,590¥48,590 税込
発送元: Amazon.co.jp 販売者: Amazon.co.jp
¥39,800¥39,800 税込
無料配送 5月24日 金曜日にお届け
発送元: 【Loop'sストア】付属品の有無は説明文をご覧ください 販売者: 【Loop'sストア】付属品の有無は説明文をご覧ください
あわせて購入:
- ビデオ
画像はありません
カラー:
-
-
-
- このビデオを見るには、次をダウンロード Flash Player
ERGOTRON エルゴトロン LX デスク デュアル モニターアーム 縦/横型 ロングポール 2画面 アルミニウム 40インチ(3.2~10kg/1モニター)まで VESA規格対応 45-549-026
詳細はこちら
詳細はこちら
- この商品は、出品者によって配送されます。
商品の配送状況は注文履歴ページからも追跡できます。
配送状況についての詳細はヘルプページをご覧ください。 - 詳細は【Loop'sストア】付属品の有無は説明文をご覧くださいの配送ポリシーについてをご覧ください。
- Amazonマーケットプレイス保証は、出品者が販売および発送する商品をご購入の場合に適用されます。Amazonマーケットプレイス保証は、購入された商品のコンディションや配送を保証するものです。
詳しくはこちら
購入オプションとあわせ買い
取り付けタイプ | テーブルトップマウント |
ムーブメントタイプ | 回転式 |
ブランド | ERGOTRON |
材質 | アルミニウム |
TVサイズ | 40 インチ |
色 | アルミニウム |
最小対応サイズ | 1 インチ |
対応デバイス | モニター, ノートパソコン |
最大傾斜角度 | 70 度 |
この商品について
- 長身のポールでさらに高い位置にモニターが設置できるデュアルモニターアームです。支柱の高さは約58cmです。
- 特許取得済みコンスタント・フォース技術により、少ない力でモニターの位置調節が可能です。ガススプリング式のような経年劣化がありません。
- 40インチまで、1モニター 3.2kgから10kgまで/総重量20kgまでのモニターに対応、VESA 100x100mm、75x75mm。
- 全色にクランプとグロメットマウントが付属しています。デスククランプは66mmの厚さに、グロメットマウントは直径8~50mmの穴、76mmまでの厚さに取り付け可能。
- モニターを持ち上げることで省スペース化が可能、デスクを広く使えます。
- 安定性に優れた製品で保証期間は安心の10年間。昇降機能は長年に渡りトラブルなく高さ調整が可能です。
- 別売の追加用アームキット(97-940-026 アルミ色/98-130-216 ホワイト/98-130-224 マットブラック)で最大4台までのモニターを取り付けできます。
- 2本のLXアームとエクステンション、ベース、ポール、デスククランプ、グロメットマウント、取り付け金具が梱包されています。
- 前後伸縮64cm、昇降33cm。パン360°、縦横回転360°、チルト後方70°/前方5°、製品本体重量 8.6kg
- モニターを取り付けてから各部の調整を行ってください。組み立て前の状態では各部の調整はできません。
おすすめの類似商品
よく一緒に購入されている商品
この商品をチェックした人はこんな商品もチェックしています
商品の情報
詳細情報
登録情報
商品モデル番号 | 45-549-026 |
---|---|
ASIN | B07514G4ZL |
発売日 | 2018/1/4 |
Amazon.co.jp での取り扱い開始日 | 2017/8/31 |
おすすめ度 |
5つ星のうち4.5 |
Amazon 売れ筋ランキング | - 55,490位パソコン・周辺機器 (パソコン・周辺機器の売れ筋ランキングを見る) - 407位コンピュータモニターアーム |
保証とサポート
ご意見ご要望
メーカーによる説明
エルゴトロン LX デスク デュアル モニターアーム 縦/横型 ロングポール
40インチ、1モニター3.2kg~10kg、合計20kgまでのモニターが設置できるデュアルモニターアームです。ポールは約58cmの長いつくりで、より高い位置にモニターを設置できます。経年劣化の心配がないバネの力を利用した特許取得済みコンスタント・フォース技術を採用、無段階でスムーズにモニターの位置を変えることができます。2画面をそれぞれ適切な並びと高さに調節することで、生産性と作業効率を高めます。LX デスク デュアル モニターアーム 縦/横型 ロングポールはエルゴトロンの徹底した品質管理のもと製造されており、長い間ご利用いただけます。
|
|
|
---|---|---|
仕様人間工学に基づいた設計と広い可動域でモニターを適切な位置と高さに配置できます。40インチ、1モニター3.2kg~10kg、合計20kgまでのモニターに対応、ゲーミングモニターも設置できます。100x100mm、75x75mmのVESAに対応。ポールの長さは約58cmです。 |
58cmのロングポール約58cmのロングポールで、モニターをさらに高い位置に設置できます。アームは使用していないときは折りたたむことができるため、省スペース化が可能です。ケーブルガイドで配線をまとめれば、さらにデスクがすっきりと広く使えます。高い安定性で、モニターの転倒や落下を防ぎます。 |
マルチモニター構成縦に並べる構成と、横に並べる構成両方に対応します。2画面利用で作業をする方が、20~30%も生産性がアップします*。アクセサリの追加用アームキットで3台目、4台目のモニターを設置可能、マルチモニター構成にも対応します。*Anderson, James A. Ph. D., et al. “Productivity and Multi-Screen Displays”, Oct 2003 |
|
|
|
---|---|---|
少ない力でモニター位置調整経年劣化のない特許取得済みコンスタント・フォース技術により、少ない力でモニターの位置調整ができます。2画面もしくは複数のモニターをニーズや作業内容に合わせて適切な高さと位置に配置できます。 |
2種類の取り付け方法デスククランプは天板の端に取り付けます。厚みは66mmまでです。グロメットマウントは天板に穴を開けたり配線口を使って取り付けます。厚みは76mm、穴の直径は8~50mmです。全色すべてにクランプとグロメットが付属しています。 |
梱包内容LXアーム2本、エクステンション2本、ベース、58cmロングポール、デスククランプ、グロメットマウント、取り付け金具が梱包されています。 |
カラーバリエーション
マットブラック、ホワイト (白) 、アルミ色の3色展開。
LX デスク デュアル モニターアーム 縦/横型 ロングポール | LX デスク デュアル モニターアーム 縦/横型 | LX デスク デュアル モニターアーム 横型 | TRACEデュアルモニターマウント | MXVデスクデュアルモニターアーム | LX デスク デュアル ダイレクト モニターアーム 横型 | |
---|---|---|---|---|---|---|
カスタマーレビュー |
5つ星のうち4.5
2,144
|
5つ星のうち4.5
2,144
|
5つ星のうち4.5
2,144
|
5つ星のうち4.3
95
|
5つ星のうち4.5
796
|
5つ星のうち4.5
2,144
|
価格 | ¥48,590¥48,590 | ¥38,890¥38,890 | ¥39,000¥39,000 | ¥74,333¥74,333 | ¥58,590¥58,590 | ¥37,580¥37,580 |
モニターサイズ | 40インチまで | 24インチまで | 27インチまで | 27インチまで | 24インチまで | 25インチまで |
荷重範囲 | 1モニター3.2kgから10kgまで/最大総重量20kgまで | 1モニター3.2kgから9.1kgまで/最大総重量18.1kgまで | 1モニター3.2kgから9.1kgまで/最大総重量18.1kgまで | 1モニター1.8kgから4.9kgまで/最大総重量3.7kgから9.8kgまで | 1モニター3.2kgから9.1kgまで/最大総重量18.1kgまで | 1モニター0.9kgから5kgまで/最大総重量1.8~10kgまで |
取付クランプ | 付属:天板厚み66mmまで | 付属:天板厚み66mmまで | 付属:天板厚み66mmまで | 付属:天板厚み65mmまで | 付属:天板厚み12~32mmまで | 付属:天板厚み60mmまで |
取付グロメットマウント | 直径8~50mmの穴、天板厚み76mm | 直径8~50mmの穴、天板厚み76mmまで | 直径8~50mmの穴、天板厚み76mmまで | 直径8~51mmの穴、天板厚み65mmまで | 直径8~31mmの穴、天板厚み32mmまで | 直径8~50mmの穴、天板厚み57mmまで |
全色 : 付属 | アルミ色 : 付属 | アルミ色/マットブラック : 付属 | 全色 : 別売 98-492-009 | 全色 : 別売 98-111 | 全色 : 別売 98-034 | |
マットブラック/ホワイト : 別売 98-035 | ホワイト : 別売 98-035 | |||||
VESA規格 | 100x100mm/75x75mm | 100x100mm/75x75mm | 100x100mm/75x75mm | 100x100mm/75x75mm | 100x100mm/75x75mm | 100x100mm/75x75mm |
カラー | アルミ色/マットブラック/ホワイト | アルミ色/マットブラック/ホワイト | アルミ色/マットブラック/ホワイト | マットブラック/ホワイト | アルミ色/マットブラック/ホワイト | アルミ色/マットブラック/ホワイト |
ブランド紹介
-
エルゴトロンは創業者であるHarry Sweereが1982年に創業し、人間工学に基づいた製品を提供し続けている世界各地に拠点を置くメーカーです。オフィスやご家庭、医療、また教育現場におけるPC作業環境に “快適” “健康” “生産性の向上” をもたらすことをミッションとしています。エルゴトロンのポートフォリオはモニターアームからモニタースタンド、昇降デスクまで多岐にわたり、テスト済みの耐久性やハイクオリティな製品として定評があります。ユニークな製品開発により200件以上の取得済み、または出願中特許を所有しています。
-
-
人間を中心としたデザイン
エルゴトロンの製品は人間を中心としたデザイン。アクティブで快適な作業環境をつくり上げ、健康度や生産性がアップします。アクセサリや製品のバリエーションも多く、さまざまな使用環境に対応します。
-
エルゴノミクスと健康
エルゴノミクスと健康を考えたソリューションから、あなたにフィットする製品を見つけてください。 姿勢を良くし、体への負担を少なくすることで作業効率が上がります。
-
プロフェッショナルグレード
エルゴトロンの製品は耐久性を考慮して設計されたプロフェッショナルグレードの製品。機能・性能が変わることなく長くご愛用いただけます。地震などの際のモニター転倒/落下防止にもなり、大切なモニターや家財を守ります。
類似商品と比較する
この商品 ERGOTRON エルゴトロン LX デスク デュアル モニターアーム 縦/横型 ロングポール 2画面 アルミニウム 40インチ(3.2~10kg/1モニター)まで VESA規格対応 45-549-026 | おすすめ | dummy | dummy | dummy | dummy | |
もう一度お試しください 追加されました | もう一度お試しください 追加されました | もう一度お試しください 追加されました | もう一度お試しください 追加されました | もう一度お試しください 追加されました | もう一度お試しください 追加されました | |
価格 | -14% ¥48,590¥48,590 参考: ¥56,601 | ¥85,078¥85,078 | -15% ¥74,333¥74,333 参考: ¥87,630 | -14% ¥23,840¥23,840 参考: ¥27,800 | -14% ¥48,590¥48,590 参考: ¥56,601 | -10% ¥15,444¥15,444 参考: ¥17,091 |
配達 | 最短で5月24日 金曜日のお届け予定です | 最短で5月24日 金曜日のお届け予定です | 最短で5月24日 金曜日のお届け予定です | 最短で5月24日 金曜日のお届け予定です | 最短で5月24日 金曜日のお届け予定です | 最短で5月24日 金曜日のお届け予定です |
お客様の評価 | ||||||
安定性 | 4.5 | 4.5 | 4.7 | 4.6 | 4.5 | — |
耐久性 | 4.3 | 4.4 | 4.5 | 4.5 | 4.3 | — |
可動域 | 4.3 | 4.0 | 4.4 | 4.4 | 4.3 | — |
使いやすさ | 3.8 | — | — | 4.5 | 3.8 | — |
軽さ | 2.1 | — | — | 3.4 | 2.1 | — |
販売元: | Amazon.co.jp | Amazon.co.jp | Amazon.co.jp | Amazon.co.jp | Amazon.co.jp | Amazon.co.jp |
最大対応サイズ | 40 inches | 32 inches | 27 inches | 34 inches | 40 inches | 34 inches |
取り付けタイプ | テーブルトップマウント | テーブルトップマウント | テーブルトップマウント | テーブルトップマウント | テーブルトップマウント | テーブルトップマウント |
ムーブメントタイプ | 回転式 | — | — | 可傾式 | 回転式, 可傾式 | — |
最大傾斜角度 | 70 degrees | 75 degrees | 30 degrees | — | 70 degrees | — |
対応端末 | モニター, ノートパソコン | モニター | モニター | モニター | モニター, ノートパソコン | モニター |
重量 | 19 pounds | 2.5 kilograms | 8.9 kilograms | — | 19 pounds | 2800 grams |
特定の情報をお探しですか?
商品の説明
♦商品説明
長身のポールでさらに高い位置にモニターが設置できるモニターアームです。作業面からの高さは約58cmです。使用しないときはコンパクトに折りたため、作業スペースを広く使えます。
特許取得済みコンスタント・フォース技術により、軽く触れるだけでモニターの位置調節が可能です。ガススプリング式のような経年劣化がありません。
40インチまで、1モニター 3.2kgから10kgまで/最大総重量20kgまでのモニターに対応、VESA 100x100mm、75x75mm。
別売の追加用アームキット (97-940-026 アルミ色 / 98-130-216 ホワイト / 98-130-224 マットブラック) で最大4台までのモニターを取り付けできます。
2枚構成:1モニター 3.2kgから10kgまで
3枚構成:1モニター 3.2kgから6.6kgまで
4枚構成:1モニター 3.2kgから5kgまで
取扱説明書に従い組み立て、モニターを取り付けてから各部の調整を行ってください。組み立て前の状態では各部の調整はできません。
耐久性に優れたアルミニウム製。保証期間は10年です。
昇降機能は10,000回ものサイクルテストが実施されており、長年に渡りトラブル無く、スムーズに高さ調整が可能です。
アルミ色、ホワイト、マットブラック全色にグロメットマウントが付属しています。
デスククランプは66mmの厚さに取り付け可能。
グロメットマウントは直径8~50mmの穴、76mmまでの厚さに取り付け可能。
別売のノートブックトレイ (50-193-200) やクイックリリースブラケット (60-589-060) 、追加用アームキット (97-940-026 アルミ色 / 98-130-216 ホワイト / 98-130-224 マットブラック) などが取り付けられます。
アルミ色、ホワイト、マットブラックの3色展開。
♦ご注意(免責)> 必ずお読みください
取扱説明書をお読みの上、正しくお使いください。
モニターを取り付けてから各部の調整を行ってください。組み立て前の状態では各部の調整はできません。
アルミ色、ホワイト、マットブラック全色にグロメットマウント付属。
♦製品ご購入後のお客様サポート窓口
japansupport@ergotron.com (日本語)
ご使用中何かご不明点がございましたら、こちらのサポート窓口へお問い合わせください。
重要なお知らせ
表示領域の画面対角線
40" / 102 cm
イメージ付きのレビュー
-
トップレビュー
上位レビュー、対象国: 日本
レビューのフィルタリング中に問題が発生しました。後でもう一度試してください。
耐久性についてはまだ1ヵ月程度なので、評価できないですが、現状は全く不安要素はないです。
角度調整とか、ちゃんと調整できます。
ぐらつかず、安定してます。
使える様です。
40インチ以内10kgまでの耐荷重みたいですが、
それよりも大きいモニターを取り付けても安定して使用出来ています。
ただ、保証対象外になりますが。
正直50インチクラスのモニターを縦並び配置しようとするとこの商品しか選択肢が無い為(あったとしても非常に高額)、なのでこのアームで
無理して取り付けて使用するしか有りません。
ただ不満が一つ有るとすれば、モニターの位置を固定する六角ネジパーツが小さく非常にネジ山が潰れやすいです。
同じ位置に設置してみたところ1cm程度の調整もピタリと決まり動作の滑らかさに感心しました。
最初からこれにしておけば良かった...
グラつくことなく、調整したい場合もネジなどで固定する必要なく重宝しています。良いお値段しますが買ってよかったです。
背面に稼働スペースが必要な点だけ注意かな。
モニター感の位置がなんか微妙にずれてしまいます。
レビューは良かったりしますが私が神経質すぎる?
他の横一列で配置できるやつの方が良かったかもです。
他の国からのトップレビュー
Ergotron actually thought of everything. My desk, like many others, has a ‘lip’ or edge that hangs off to increase the structural integrity of the desktop. This started to worry me as I wasn’t sure if the clamp-press mechanism would be wide enough for the edge ‘lip’ hanging from my desk. When it arrived it was exactly that size fully widened, so it wouldn’t fit. However in the box there were parts to convert the base of the arm to attach to a desk via a bolt through a hole(e.g. a wire organizer hole, drill hole). This saved me from having to heavily modify my desk or return the arm, and made the entire building process a breeze even with hurdles in the way.
_____________
Pros:
- easy to assemble
- very robust and sturdy, will hold up very well within guidelines
- fairly decent free range of motion
Cons:
- dat price tag $$$$
- certain features like cable routing and swivel leave some very minor grievances
LONG version :
______________
You don't have to read it all, but if you're already looking into buying this, there's a decent chance you are in a similar situation. If I was being nitpicky this would be a 4/5, but seeing as how there's really no other manufacturer that readily provides a solution to my problem it really is just the best I can get, from what I've seen.
I upgraded from an LG 34UC89G-B 34" 21:9 to an Alienware AW3423DW 34" 21:9 and wanted to keep both monitors, with the new one on bottom and old on mounted on top. My old 2 arm mount was not going to be able to support this much weight as my other monitor was just a 27" 16:9 and it barely held those together. I didn't want to have to screw anything into my wall and I wasn't 100% sure on my desk space so I wanted free moving arms for orienting the monitors before finalizing where I want them to stay.
Once I got this I was able to set my monitors up stacked on top of each other. While the bottom one isn't quite sitting as low as it can go, it's not far off. But the top monitor is just about using the mount's maximum capabilities in terms of being able to space these monitors apart while still leaving a tiny bit of room for adjustment. I have been able to pull my top monitor forward and rotate it portrait for documents and such though I have not done the same with the bottom monitor.
______________________________________________________
Overall actual use after setup:
9/10
The monitors themselves are not on the extreme end of heavy but they're not light. They both fall within the specifications of the mount. But where Ergotron excels with the LX is that it will actually support curved monitors up to that weight as well, as the curvature changes the center of balance of the overall monitor and puts more stress when extended out than your typical flat monitor. This is usually where you can see other people having issues with sag when approaching the upper limits of other mounting systems. These have not sagged at all since tightening down the screws and move with a fair bit of range, staying in place afterwards. However I do not extensively move my monitors around often and don't know how well it would hold up if you just kept moving them around constantly, though with the construction quality I'd wager it would be fine.
One thing I was told from a friend who has the same mount: if your monitor is really bottom heavy for whatever reason and you decide to use it portrait style, the minor taps and thumps from your desk will cause it to try to rotate back to a horizontal position, skewed about 5-10 degrees. It's very minor and just takes a quick second to readjust but keep in mind that it may happen as 1 side is now far heavier than the other.
______________________________________________________
Setup process:
9/10
The setup itself was very easy. I saw other reviews having issues with it and maybe getting some help but if you follow the instructions provided, it is extremely easy, especially compared to setting up other mounts where you have to screw in the whole assembly to the monitor and take the entire piece and clamp it on your desk. You need to clamp down the base and bottom arm portions of the mount, then screw in the upper portions to the monitors BEFORE putting the rest of the mount together. The top arm portion falls right into the bottom and you just tighten the screw afterwards. If you can physically lift your monitor + 8 ounces or so, you will have no issues putting it together. One thing I will note: tightening the actual swivel head on the monitor so that the tension matches the weight of the monitor may be difficult if you are short since it adjusts from the top.
WARNING: If your desk is particle board or something, I highly recommend buying reinforcement plates for the clamp. The clamp that the LX comes with is fairly sizeable but if you're going to be putting 50 lbs of pressure on 1 spot on your desk, it's best to not worry about the weight snapping your desk in half. If your desk isn't sturdy material: the arm mount will hold up, your desk will not. You're already splurging on this mount, don't cheap out and break your desk and potentially your monitors by skimping out on a $10 metal plate. If you don't want to go that route and don't care much about aesthetics, you can just use some wood.
______________________________________________________
Cable management:
5/10
Cable management looked like a mere afterthought. It's serviceable and hides the cables well enough but it's nothing to write home about. This feature has been better executed in cheaper models.
______________________________________________________
Range of motion:
8/10
Range of motion is better than most for sure. While it will still hold them in place, some positions and setups can be limited if you have enormous monitors. If you're using 2 24" monitors you will have zero issues, but the more you approach 40", even on 1 monitor, the options get more and more limited.
______________________________________________________
Final notes:
I wish the pole was longer. That would solve a lot of issues people have had with mobility using large monitors. The arm mounts themselves hold up well, the fitting of large monitors just leaves something to be desired, especially out of something as expensive as this.
2023年2月28日にアメリカ合衆国でレビュー済み
_____________
Pros:
- easy to assemble
- very robust and sturdy, will hold up very well within guidelines
- fairly decent free range of motion
Cons:
- dat price tag $$$$
- certain features like cable routing and swivel leave some very minor grievances
LONG version :
______________
You don't have to read it all, but if you're already looking into buying this, there's a decent chance you are in a similar situation. If I was being nitpicky this would be a 4/5, but seeing as how there's really no other manufacturer that readily provides a solution to my problem it really is just the best I can get, from what I've seen.
I upgraded from an LG 34UC89G-B 34" 21:9 to an Alienware AW3423DW 34" 21:9 and wanted to keep both monitors, with the new one on bottom and old on mounted on top. My old 2 arm mount was not going to be able to support this much weight as my other monitor was just a 27" 16:9 and it barely held those together. I didn't want to have to screw anything into my wall and I wasn't 100% sure on my desk space so I wanted free moving arms for orienting the monitors before finalizing where I want them to stay.
Once I got this I was able to set my monitors up stacked on top of each other. While the bottom one isn't quite sitting as low as it can go, it's not far off. But the top monitor is just about using the mount's maximum capabilities in terms of being able to space these monitors apart while still leaving a tiny bit of room for adjustment. I have been able to pull my top monitor forward and rotate it portrait for documents and such though I have not done the same with the bottom monitor.
______________________________________________________
Overall actual use after setup:
9/10
The monitors themselves are not on the extreme end of heavy but they're not light. They both fall within the specifications of the mount. But where Ergotron excels with the LX is that it will actually support curved monitors up to that weight as well, as the curvature changes the center of balance of the overall monitor and puts more stress when extended out than your typical flat monitor. This is usually where you can see other people having issues with sag when approaching the upper limits of other mounting systems. These have not sagged at all since tightening down the screws and move with a fair bit of range, staying in place afterwards. However I do not extensively move my monitors around often and don't know how well it would hold up if you just kept moving them around constantly, though with the construction quality I'd wager it would be fine.
One thing I was told from a friend who has the same mount: if your monitor is really bottom heavy for whatever reason and you decide to use it portrait style, the minor taps and thumps from your desk will cause it to try to rotate back to a horizontal position, skewed about 5-10 degrees. It's very minor and just takes a quick second to readjust but keep in mind that it may happen as 1 side is now far heavier than the other.
______________________________________________________
Setup process:
9/10
The setup itself was very easy. I saw other reviews having issues with it and maybe getting some help but if you follow the instructions provided, it is extremely easy, especially compared to setting up other mounts where you have to screw in the whole assembly to the monitor and take the entire piece and clamp it on your desk. You need to clamp down the base and bottom arm portions of the mount, then screw in the upper portions to the monitors BEFORE putting the rest of the mount together. The top arm portion falls right into the bottom and you just tighten the screw afterwards. If you can physically lift your monitor + 8 ounces or so, you will have no issues putting it together. One thing I will note: tightening the actual swivel head on the monitor so that the tension matches the weight of the monitor may be difficult if you are short since it adjusts from the top.
WARNING: If your desk is particle board or something, I highly recommend buying reinforcement plates for the clamp. The clamp that the LX comes with is fairly sizeable but if you're going to be putting 50 lbs of pressure on 1 spot on your desk, it's best to not worry about the weight snapping your desk in half. If your desk isn't sturdy material: the arm mount will hold up, your desk will not. You're already splurging on this mount, don't cheap out and break your desk and potentially your monitors by skimping out on a $10 metal plate. If you don't want to go that route and don't care much about aesthetics, you can just use some wood.
______________________________________________________
Cable management:
5/10
Cable management looked like a mere afterthought. It's serviceable and hides the cables well enough but it's nothing to write home about. This feature has been better executed in cheaper models.
______________________________________________________
Range of motion:
8/10
Range of motion is better than most for sure. While it will still hold them in place, some positions and setups can be limited if you have enormous monitors. If you're using 2 24" monitors you will have zero issues, but the more you approach 40", even on 1 monitor, the options get more and more limited.
______________________________________________________
Final notes:
I wish the pole was longer. That would solve a lot of issues people have had with mobility using large monitors. The arm mounts themselves hold up well, the fitting of large monitors just leaves something to be desired, especially out of something as expensive as this.
Je l'utilise pour un écran 24 pouce et un 27 pouce, vraiment foncez si vous cherchez quelque chose de stable.
* Very full range of motion for two monitors. I can pull them out, push them back, tilt them forward or sideways, raise them, etc.
* I can mount it against a wall, push the monitors back, and only require about two inches of buffer between the desk and the wall. This allows me to use my full desk depth and not require buffer off of the wall.
* Sturdy. Tensions are adjustable. No sagging after a week of use.
* The rail allows both monitors to be easily aligned, minimizing the hassle of manually aligning individual arms.
I mounted two 27" 2k (16:9) monitors and they fit fine. The Ergotron website compatibility checker said they wouldn't fit, but they do and I have about 1/2" buffer left on the rail. Between that and that it's rated for up to 20 lbs per monitor, I would imagine that almost any set of 27" monitors would fit on this. Larger monitors will likely require the next size of of the Ergotron 2 monitor rail mount.
The biggest downside is probably the cable management, or lack thereof. The only provided cable management is that the lower half of the arm has a removable plate at the bottom that allows a couple cables to be run through it. I have 2 display cables and 1 power cable per monitor (6 total) and they don't come close to all fitting. I have to do the cable management myself.
A more minor downside is that if the monitors are pushed back with the arm angled to the side (ex, there's a wall behind the monitors) the monitor stand won't align with the center of the monitors unless the monitors are very high. The arm is made of two pieces of unequal length (all Erogotron arms are), so angling the arm to the side and having the top piece double back the bottom piece yields a center stand that is 2-3 inches offset from the center of the monitors.
As an aside, here's a detailed schematic showing the exact measurements: https://www.ergodirect.com/18667-ergotron-45-489-026-lx-desk-mount-dual-direct-arm-polished-aluminum.html