![Official Arduino Starter Kit [K000007] (English Projects Book) - 12 DIY Projects with All Necessary Electronic Components and](https://images-na.ssl-images-amazon.com/images/I/617sMRpfODL._AC_UL160_SR160,160_.jpg)
I plan to automate the air intake control on my wood stove, and that means taking temperatures from two thermocouples, analyzing them, and moving a lever. An Arduino can do that very easily.
But I know nothing about Arduinos other than they exist. UNTIL NOW.
I just finished Lesson 5, Digital Inputs. The PDF instructions explain what is going on and warn you that in this particular section things seem a bit backwards, a good thing to make you aware of so you can learn. Each lesson is brief with excellent pictures and diagrams and just enough explanation. Follow and HAVE FUN.
The kit already contains a lot of what I will need to build my project someday: Arduino and power supply; LCD display; motors; motor controllers; buttons; LEDs and other electronic bits; remote controller and sensor. I will need to add thermocouples and the associated interfaces, and the information for those is available everywhere on the 'net. I may also add Bluetooth and WiFi, using BLYNK to create an app for the phone...someday.
The kit comes neatly packed in a nice plastic container with a bunch of compartments. You get your development environment from the 'net, and the included CD contains all the code you'll need, which is EASY to upload to the Arduino. There are breadboards to let you lay out your parts, do the lessons, and experiment. You do not need to solder. You just need a PC with a USB port, and you install the development environment there and plug the board in. The Arduino already has a program loaded and running to blink an LED, and you will modify that program by changing a number, then you'll upload it and see the results. That is how easy this is to get going.
Additional parts are easy to get and relatively inexpensive, and when your project is all designed, you can get boards where you can solder everything permanently. I have a long way to go to get to that point. This kit, though, has been a wonderful learning experience so far.
About the only things I found with the kit, which are MINOR:
- It is tough to discern the colors on the resisters. This isn't the fault of Elegoo. I suggest getting a stand with a magnifying glass and light. Note that the tape from which the resisters come is labeled, so you can just go by that.
- I needed a longer USB cable than what was included. I had one on hand. Again, not Elegoo's issue, as they supplied a USB cable in the kit. Plug and play.
Overall: Lots o' stuff in a fun kit with great instructions!
Note: I do have some basic familiarity with electronic components and programming. Having these basic skills does help, but I think a beginner can follow along. Just take your time to follow the pictures, and take even more time to understand the programming examples (the "sketches"), which are short and fairly clear. And HAVE FUN.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Make it a bundle
We found 5 bundles with this item:
ELEGOO Mega R3 Project The Most Complete Ultimate Starter Kit with Tutorial Compatible with Arduino IDE
Page 1 of 1Start overPage 1 of 1
-
ELEGOO Mega 2560 Project The Most Complete Ultimate Starter Kit and ELEGOO Upgraded 37 in 1 Sensor Modules Kit and ELEGOO 120pcs Multicolored Dupont Wire$95.99 $109.96This bundle contains 3 items -
ELEGOO Mega R3 Project The Most Complete Ultimate Starter Kit & ELEGOO MEGA R3 Board$77.98 $95.98This bundle contains 2 items -
ELEGOO Mega R3 Project The Most Complete Ultimate Starter Kit & ELEGOO Upgraded 37 in 1 Sensor Modules Kit$89.99 $102.98This bundle contains 2 items -
ELEGOO Mega R3 Project The Most Complete Ultimate Starter Kit & ELEGOO MEGA R3 Board ATmega 2560$77.98 $95.98This bundle contains 2 items
Frequently bought together
$65.99
Get it as soon as Saturday, May 11
In Stock
+
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may ship from close to you
Page 1 of 1 Start overPage 1 of 1
From the brand
-
ELEGOO STEM kits provide all the necessary components, sensors, wires, and boards for you to get started with programming, learning electronics, and creating IoT projects.
We strive our best to make STEM education easy to learn and accessible to the young generation.
-
-
-
-
Product Description
ELEGOO Mega R3 The Most Complete Starter Kit
Want to learn how to work with electronics and programming but need a little help? You've come to the right place!
ELEGOO MEGA 2560 Starter Kit provides an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software, which evolves the user from beginner to professional level.
Our starter kit is designed to get you started quickly and easily on your path of learning electronics. Originally this pack was designed to follow the introductory tutorials with 33 creatives and fun projects on our CD and website. But it's a great starter kit in general as it's designed for everyone even novices who has very little or no electronics and programming experience. The starter bundle contains everything you need (except tools) to take your first step on Arduino journey!
Starter kit for Everyone to Learn The Science of Electronics, Programming and Robotics
Electronics is not as complicated as you imagine especially with ELEGOO MEGA 2560 Starter Kit. For advanced users like professional lab engineers, electronic major students and experienced Arduino hobbyists, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.
What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.
It’s a good choice and perfect gift for your kids, friends, family members or whoever are obsessed with electronics, programming or robotics to take their first steps on electronics journey!
The Most Complete Starter Kit with High Quality Components and Tutorial
Quantity and quality are both important here in Elegoo MEGA starter kit. The most essential parts in this kit are MEGA controller board and expansion board, which is a perfect clone with excellent product finish Compatible with Arduino projects. Besides, we offer other over 60 kinds of components and sensors from small parts like LED diodes, resistors and potentiometer to big parts like LCD1602, RFID module and 830 tie-points breadboard, which meet your demands for your different projects either it is simple or complex.
Sturdy quality is definitely the most important thing to Elegoo even with so many components provided we never compromised on the quality. Instead we keep improving our product quality in our own factory and we produce the products by ourselves under high standards and strict quality control. Pins and wires on some of the parts like LCD16502 and motors have been pre-soldered which is very convenient and saves your time.
LCD1602 Display module
LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.
Lining up the display with the top of the breadboard helps to identify its pins without too much counting, especially if the breadboard has its rows numbered with row 1 as the top row of the board. Do not forget, the long yellow lead that links the slider of the pot to pin 3 of the display. The 'pot' is used to control the contrast of the display.
DC Motors and L293D Transistor
In this project you will learn how to control a small DC motor using a Mega board and a L293D transistor, which is a very useful chip. It can actually control two motors independently. We are just using half the chip in this lesson, most of the pins on the right hand side of the chip are for controlling a second motor.
L293D is quadruple high-current half-H drivers and designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is also designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V and drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications.
74HC595 Shift Register and LEDs
74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time. This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it!
74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| ELEGOO 37 in 1 Sensor Kit V2.0 | ELEGOO UNO Project Super Starter Kit | ELEGOO UNO Project Smart Robot Car Kit | ELEGOO UNO R3 Project Complete Starter Kit | ELEGOO UNO R3 Board ATmega328P | ELEGOO Mega 2560 Board | |
| Customer Reviews |
2,313
|
14,804
|
3,652
|
2,917
|
4,599
|
2,535
|
| Price | $36.99 | $44.99 | $49.99 | $59.99 | $14.99 | $20.99 |
| Control board | / | UNO R3 | UNO R3 | MEGA | NANO | UNO R3 |
| Compatibility with Arduino | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Projects Tutorial Included | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Assembly Requirement | No | No | ✓ | No | ✓ | ✓ |
| Reasons to Buy | Updated Version, Compatibility with Arduino IDE and STM32. | Tutorial of 24 Projects, Cost-effetive Starter Kit | ELEGOO ElegooKit APP; FPV Mode; Obstacle Avoidance; Line Tracking Mode | Tutorial of 33 Projects, Powerful Mega R3 Control Board | The Same ATmega328 with Arduino UNO R3 Board; The Same ATmega16U2 with Arduino | Extra Points; 256 KB of Flash Memory Store; Simplification and Security; Diverse Power Methods |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
0:23
Click to play video
Unbiased Review - Elegoo Mega Starter Kit
Renee Makowski
Videos for this product
1:53
Click to play video
Customer Review: It's Addicting!
Wulfric Schenk von Landsberg
Reviews with images
Quick to get going. Instructional. Lots o' parts. FUN!
I plan to automate the air intake control on my wood stove, and that means taking temperatures from two thermocouples, analyzing them, and moving a lever. An Arduino can do that very easily.But I know nothing about Arduinos other than they exist. UNTIL NOW.I just finished Lesson 5, Digital Inputs. The PDF instructions explain what is going on and warn you that in this particular section things seem a bit backwards, a good thing to make you aware of so you can learn. Each lesson is brief with excellent pictures and diagrams and just enough explanation. Follow and HAVE FUN.The kit already contains a lot of what I will need to build my project someday: Arduino and power supply; LCD display; motors; motor controllers; buttons; LEDs and other electronic bits; remote controller and sensor. I will need to add thermocouples and the associated interfaces, and the information for those is available everywhere on the 'net. I may also add Bluetooth and WiFi, using BLYNK to create an app for the phone...someday.The kit comes neatly packed in a nice plastic container with a bunch of compartments. You get your development environment from the 'net, and the included CD contains all the code you'll need, which is EASY to upload to the Arduino. There are breadboards to let you lay out your parts, do the lessons, and experiment. You do not need to solder. You just need a PC with a USB port, and you install the development environment there and plug the board in. The Arduino already has a program loaded and running to blink an LED, and you will modify that program by changing a number, then you'll upload it and see the results. That is how easy this is to get going.Additional parts are easy to get and relatively inexpensive, and when your project is all designed, you can get boards where you can solder everything permanently. I have a long way to go to get to that point. This kit, though, has been a wonderful learning experience so far.About the only things I found with the kit, which are MINOR:- It is tough to discern the colors on the resisters. This isn't the fault of Elegoo. I suggest getting a stand with a magnifying glass and light. Note that the tape from which the resisters come is labeled, so you can just go by that.- I needed a longer USB cable than what was included. I had one on hand. Again, not Elegoo's issue, as they supplied a USB cable in the kit. Plug and play.Overall: Lots o' stuff in a fun kit with great instructions!Note: I do have some basic familiarity with electronic components and programming. Having these basic skills does help, but I think a beginner can follow along. Just take your time to follow the pictures, and take even more time to understand the programming examples (the "sketches"), which are short and fairly clear. And HAVE FUN.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on September 27, 2020
But I know nothing about Arduinos other than they exist. UNTIL NOW.
I just finished Lesson 5, Digital Inputs. The PDF instructions explain what is going on and warn you that in this particular section things seem a bit backwards, a good thing to make you aware of so you can learn. Each lesson is brief with excellent pictures and diagrams and just enough explanation. Follow and HAVE FUN.
The kit already contains a lot of what I will need to build my project someday: Arduino and power supply; LCD display; motors; motor controllers; buttons; LEDs and other electronic bits; remote controller and sensor. I will need to add thermocouples and the associated interfaces, and the information for those is available everywhere on the 'net. I may also add Bluetooth and WiFi, using BLYNK to create an app for the phone...someday.
The kit comes neatly packed in a nice plastic container with a bunch of compartments. You get your development environment from the 'net, and the included CD contains all the code you'll need, which is EASY to upload to the Arduino. There are breadboards to let you lay out your parts, do the lessons, and experiment. You do not need to solder. You just need a PC with a USB port, and you install the development environment there and plug the board in. The Arduino already has a program loaded and running to blink an LED, and you will modify that program by changing a number, then you'll upload it and see the results. That is how easy this is to get going.
Additional parts are easy to get and relatively inexpensive, and when your project is all designed, you can get boards where you can solder everything permanently. I have a long way to go to get to that point. This kit, though, has been a wonderful learning experience so far.
About the only things I found with the kit, which are MINOR:
- It is tough to discern the colors on the resisters. This isn't the fault of Elegoo. I suggest getting a stand with a magnifying glass and light. Note that the tape from which the resisters come is labeled, so you can just go by that.
- I needed a longer USB cable than what was included. I had one on hand. Again, not Elegoo's issue, as they supplied a USB cable in the kit. Plug and play.
Overall: Lots o' stuff in a fun kit with great instructions!
Note: I do have some basic familiarity with electronic components and programming. Having these basic skills does help, but I think a beginner can follow along. Just take your time to follow the pictures, and take even more time to understand the programming examples (the "sketches"), which are short and fairly clear. And HAVE FUN.
Quick to get going. Instructional. Lots o' parts. FUN!
Reviewed in the United States on September 27, 2020
I plan to automate the air intake control on my wood stove, and that means taking temperatures from two thermocouples, analyzing them, and moving a lever. An Arduino can do that very easily.Reviewed in the United States on September 27, 2020
But I know nothing about Arduinos other than they exist. UNTIL NOW.
I just finished Lesson 5, Digital Inputs. The PDF instructions explain what is going on and warn you that in this particular section things seem a bit backwards, a good thing to make you aware of so you can learn. Each lesson is brief with excellent pictures and diagrams and just enough explanation. Follow and HAVE FUN.
The kit already contains a lot of what I will need to build my project someday: Arduino and power supply; LCD display; motors; motor controllers; buttons; LEDs and other electronic bits; remote controller and sensor. I will need to add thermocouples and the associated interfaces, and the information for those is available everywhere on the 'net. I may also add Bluetooth and WiFi, using BLYNK to create an app for the phone...someday.
The kit comes neatly packed in a nice plastic container with a bunch of compartments. You get your development environment from the 'net, and the included CD contains all the code you'll need, which is EASY to upload to the Arduino. There are breadboards to let you lay out your parts, do the lessons, and experiment. You do not need to solder. You just need a PC with a USB port, and you install the development environment there and plug the board in. The Arduino already has a program loaded and running to blink an LED, and you will modify that program by changing a number, then you'll upload it and see the results. That is how easy this is to get going.
Additional parts are easy to get and relatively inexpensive, and when your project is all designed, you can get boards where you can solder everything permanently. I have a long way to go to get to that point. This kit, though, has been a wonderful learning experience so far.
About the only things I found with the kit, which are MINOR:
- It is tough to discern the colors on the resisters. This isn't the fault of Elegoo. I suggest getting a stand with a magnifying glass and light. Note that the tape from which the resisters come is labeled, so you can just go by that.
- I needed a longer USB cable than what was included. I had one on hand. Again, not Elegoo's issue, as they supplied a USB cable in the kit. Plug and play.
Overall: Lots o' stuff in a fun kit with great instructions!
Note: I do have some basic familiarity with electronic components and programming. Having these basic skills does help, but I think a beginner can follow along. Just take your time to follow the pictures, and take even more time to understand the programming examples (the "sketches"), which are short and fairly clear. And HAVE FUN.
Images in this review
Reviewed in the United States on March 8, 2024
Reviewed in the United States on March 9, 2018
