To see product details, add this item to your cart. You can always remove it later.
FREE Returns
Added to

Sorry, there was a problem.

There was an error retrieving your Wish Lists. Please try again.

Sorry, there was a problem.

List unavailable.

BTF-LIGHTING WS2812B IC RGB 5050SMD Pure Gold Individual Addressable LED Strip High Quality 16.4FT 300LED 60LED/m Flexible Full Color IP30 DC5V for DIY Chasing Color Project(No Adapter or Controller)

4.6 4.6 out of 5 stars 4,634 ratings

To see product details, add this item to your cart. You can always remove it later.
FREE Returns
Extra Savings Save 2% on 3 pin Multi-function Solderless Connector Kit For This LED Strip when you purchase 1 or more Qualifying items offered by BTF-Lighting. 3 Applicable Promotion(s)
  • Save 2% on 3 pin Multi-function Solderless Connector Kit For This LED Strip when you purchase 1 or more Qualifying items offered by BTF-Lighting. Shop items
  • Save 2% on RF Remote RB3+SP630E Bluetooth Controller Kit For This LED Strip when you purchase 1 or more Qualifying items offered by BTF-Lighting. Shop items
  • Save 2% on 650ft Long Distance Signal Amplifier (Must work with the controller) when you purchase 1 or more Qualifying items offered by BTF-Lighting. Shop items
Eligible for Return, Refund or Replacement within 30 days of receipt
This item can be returned in its original condition for a full refund or replacement within 30 days of receipt.
Black Pcb Ip30
16.4FT 300LED

Purchase options and add-ons


About this item

  • High-quality LED Chip. Instead of others' alloy chip wire or copper chip wire, This WS2812B RGB LED use Pure Gold Wires inner, which more stable, have exceptional quality, ultra bright, less light decay and longer life.
  • Individually Addressable SPI LED. Dream full color Programmable LED Strip, WS2812B IC Built-in 5050SMD. Static effect, Chasing effect, special effect etc. 256 brightness display and 24-bit color display.
  • Easy Using. It comes with 3pin JST-SM connectors on both ends for easy installation and separated power/ground wires on both ends. Each LED is cuttable. You can shorten, lengthen or bend it freely if you want.Can be connected in series or parallel.
  • Amazing DIY Play. The addressable IC chip is built-in the 5050SMD. Each pixel can have its own color and brightness as your wish. Compatible with WLED, K-1000C, Rasp Pi, UNO R3, ESP8266, ESP32 etc Programmable Controllers. Support RB3+SP630E, SP611E, SP608E, SP602E etc Bluetooth music Controllers, SP530E ,WT-SPI,SP511E etc smart 2.4GHz Wi-Fi Alexa music controllers.
  • Only Support DC5V. Match use controller can appear colorful curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software. Power adapter and controller need to be purchased separately.
  • Widely Application. Making led screen, led wall, advertising board, apply to hotel, KTV, bars, advertising signs, Festivel Christmas or wedding party decoration. There is adhesive tape on IP30/IP65 LED strip's back, so you can stick it to the wall or other items conveniently as you like. IP67 is available with fixing clips and screws.
See more product details
Make it a bundle
We found 2 bundles with this item:
BTF-LIGHTING WS2812B IC RGB 5050SMD Pure Gold Individual Addressable LED Strip High Quality 16.4FT 300LED 60LED/m Flexible Full Color IP30 DC5V for DIY Chasing Color Project(No Adapter or Controller)

Frequently bought together

$30.99 ($1.89/Foot)
Get it as soon as Monday, Apr 1
In Stock
Sold by BTF-Lighting and ships from Amazon Fulfillment.
+
$9.99
Get it as soon as Monday, Apr 1
In Stock
Sold by BTF-Lighting and ships from Amazon Fulfillment.
Total price:
To see our price, add these items to your cart.
Details
Added to Cart
Choose items to buy together.

Compare with similar items

This Item
BTF-LIGHTING WS2812B IC RGB 5050SMD Pure Gold Individual Addressable LED Strip High Quality 16.4FT 300LED 60LED/m Flexible Full Color IP30 DC5V for DIY Chasing Color Project(No Adapter or Controller)
BTF-LIGHTING WS2812B IC RGB 5050SMD Pure Gold Individual Addressable LED Strip High Quality 16.4FT 300LED 60LED/m Flexible Full Color IP30 DC5V for DIY Chasing Color Project(No Adapter or Controller)
Recommendations
LOAMLIN WS2812B Individually Addressable RGB LED Strip 16.4FT 5050SMD Smart Flexible Dream Full Color 60Pixels/m Balck PCB Light IP30 Non Waterproof DC5V (Black PCB, 16.4FT 300LEDs IP30)
dummy
SVFISHKK WS2812B LED Strip Individual Addressable Light 16.4FT 60Pixels/m 300Pixels Dream Color SMD 5050 LED Pixel RGB Strip Non-Waterproof DC5V (White PCB)
dummy
ADRESUNO WS2812B LED Strip Individual Addressable Light SMD 5050 144Pixels RGB Pixel Strip DC5V (3.2FT 144LEDS Non-Waterproof, Black PCB)
dummy
icever WS2812B MagicRGB LED Strip - 16.4FT 300 LEDs RGB 5050SMD, Addressable, Flexible Black PCB, IP30 Bare Board, Dream Color - DC5V (excludes Power Supply & Controller)
dummy
Wi-Fi Smart LED Controller | WLED Pre-Installed | Internal Antenna | Designed to Control WS2811 or WS2812B 5volt Smart LEDs
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Price$30.99$19.99-5% $17.99
Typical:$18.99
$12.99$29.99$39.96
Delivery
Get it as soon as Monday, Apr 1
Get it as soon as Monday, Apr 1
Get it as soon as Monday, Apr 1
Get it as soon as Monday, Apr 1
Get it as soon as Monday, Apr 1
Get it Apr 1 - 3
Customer Ratings
Brightness
4.5
4.1
3.7
4.2
4.5
Adhesion
3.8
3.4
3.0
3.5
5.0
Easy to install
4.5
3.8
3.5
4.3
Value for money
4.1
3.4
4.5
4.1
Remote Control
2.2
2.6
3.0
Sold By
BTF-Lighting
LOAMLIN
qiweiyustore
ADRESUNO
icever
Domestic Automation LLC
size
16.4FT 300LED
16.4FT 300LEDs IP30
3.2FT 144LEDS Non-Waterproof
16.4FT 300LED
light source type
LED
LED
LED
LED
LED
LED
power source
Corded Electric
‎DC5V Power Support Only
Battery Powered
DC
Corded Electric
wired electric, Corded Electric
light sources
300
300
300
144
300
1
control method
application
application
application
application
remote

Product information

Technical Details

Additional Information

Warranty & Support

Amazon.com Return Policy:Amazon.com Voluntary 30-Day Return Guarantee: You can return many items you have purchased within 30 days following delivery of the item to you. Our Voluntary 30-Day Return Guarantee does not affect your legal right of withdrawal in any way. You can find out more about the exceptions and conditions here.
Product Warranty: For warranty information about this product, please click here

Feedback

BTF-LIGHTING

BTF-LIGHTING WS2812B IC RGB 5050SMD Pure Gold Individual Addressable LED Strip High Quality 16.4FT 300LED 60LED/m Flexible Full Color IP30 DC5V for DIY Chasing Color Project(No Adapter or Controller)


Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

Where did you see a lower price?

/
/
/
/
Please sign in to provide feedback.

Product details

  • Is Discontinued By Manufacturer ‏ : ‎ No
  • Product Dimensions ‏ : ‎ 4.72 x 3.94 x 0.59 inches; 1.76 ounces
  • Item model number ‏ : ‎ WS2812B5M60LB30
  • Batteries ‏ : ‎ 20 A batteries required.
  • Date First Available ‏ : ‎ March 1, 2016
  • Manufacturer ‏ : ‎ BTF-LIGHTING Technology Co., Limited
  • ASIN ‏ : ‎ B01CDTEJBG
  • Country of Origin ‏ : ‎ China
  • Customer Reviews:
    4.6 4.6 out of 5 stars 4,634 ratings

What's in the box

  • 3 PIN male connector

  • Product Description

    Product Details

    第二

    Parameter Table

    LED Type WS2812B RGB LED Strip Light
    IC type WS2812B IC
    FPCB board color Black/White
    Input Voltage DC5V
    Led Quantity 300LED
    Color order G R B(NOT RGB)
    Waterproof level IP30/IP65/IP67
    LED Strip Width(IP30/IP65) 10mm
    LED Strip Width(IP67) 12mm(include silicone sheathing)
    Operating Temperature -4℉~104℉(-20℃~+40℃ )
    Color Full color 24-bit
    Recommended power supply DC5V10A (Power supply or controller is not included)
    Length x Width x Height IP30:5000mmx10mmx2mm IP65:5000mmx10mmx3mm IP67:5000mmx12mmx3.85mm
    Wave Length(nm) Red(620-630) ; Green(515-530) ; Blue(465-475)
    Length 16.4FT
    Double Side Tape IP30/IP65 . There is no double side tape on IP67.

    Choose the suitable product for yourself

    1

    SMD WS2812B RGB LED Strip

    RGBIC COB

    FCOB SPI WS2811 RGB LED

    2811

    SMD WS2811 RGB LED Strip

    B07LG5S6DK

    SMD WS2815 RGB LED Strip

    6812

    SMD SK6812 RGBW LED Strip

    2814

    SMD WS2814 RGBW LED Strip

    Customer Reviews
    4.6 out of 5 stars
    4,634
    4.4 out of 5 stars
    181
    4.6 out of 5 stars
    64
    4.5 out of 5 stars
    324
    4.4 out of 5 stars
    612
    4.4 out of 5 stars
    31
    Manufacture Technique
    SMD(Surface Mounted Devices) FCOB(Flip Chip On Board) SMD(Surface Mounted Devices) SMD(Surface Mounted Devices) SMD(Surface Mounted Devices) SMD(Surface Mounted Devices)
    IC Type
    WS2812B IC WS2811 IC WS2811 IC WS2815 IC SK6812 IC WS2814 IC
    Color
    RGB RGB RGB RGB RGB+Warm White RGB+Warm White
    Working Voltage
    DC 5V DC12V/DC24V DC12V/DC24V DC12V DC5V DC12V
    FPCB Board Color
    Black/White White Black/White Black/White Black/White Black/White
    LED Width
    IP30/ IP65 -10mm;IP67 -12mm 12mm 10mm IP30/ IP65 -10mm;IP67 -12mm IP30/ IP65 -10mm;IP67 -12mm 10mm
    Dual-Signal
    Connectors
    3pin 3pin 3pin 4pin 3pin 3pin
    BT Controller
    SP638E/SP611E SP638E/SP611E SP638E/SP611E SP638E/SP611E SP617E/SP639E SP617E/SP639E
    WIFI Controller
    SP511E SP511E SP511E SP108E SP108E -
    RF Controller
    SP602E SP602E SP602E SP602E RB3+SP639E RB3+SP639E

    From the brand

    Looking for specific info?

    Customer reviews

    4.6 out of 5 stars
    4.6 out of 5
    4,634 global ratings

    Customers say

    Customers like the brightness, color and ease of use of the string light. For example, they mention it's very bright, provides practical visibility in the evening and that the colors are bright and eye catching. They appreciate the value, and quality of the product. That said, some complain about the adhesion and disagree on ease of cutting.

    AI-generated from the text of customer reviews

    265 customers mention186 positive79 negative

    Customers like the quality of the LED light strips. They say that the strips have been very successful for them, with the LEDs working great and fairly bright given the correct power. The one meter strip works flawlessly, with no issues. The strips are well received by guests and the built-in mic works well. Customers also mention that the lights work great with little heat.

    "...We connected 4 and did power injection after two. Turned out great. Looks great. My daughter loves it!" Read more

    "...strips themselves: As an electrical engineer I can say these are well made strips! Flex PCBs can vary in thickness and quality...." Read more

    "...But after a few minutes the strips started to be unresponsive...." Read more

    "...Easy. Ocean vibes in your bathtub? Done. The possibilities are endless, and my Instagram feed is already thriving...." Read more

    135 customers mention107 positive28 negative

    Customers like the brightness of the string light. They say it's super bright, has great colors, and works just fine. The strips provide practical visibility in the evening, and have a great coverage of 60LEDs/m.

    "...Again product works flawlessly, Leds are super bright, they don't get too hot when set to full brightness.. I have the remote connected to both my..." Read more

    "Got the 16.4 ft/300 LED version. Nice and bright, worked well with the FastLED library with an Arduino driving them...." Read more

    "...No issues, stable colors, great vibrance and brightness. Setup with WLED running on an ESP8266 was as easy as custom lighting gets...." Read more

    "...But except for that, the rest of these are very bright and have good color...." Read more

    76 customers mention66 positive10 negative

    Customers like the color of the string light. They say it has crisp, vibrant, and eye-catching colors. Some mention the brightness and color are uniform and matched between strips. Overall, most are satisfied with the color and brightness of the product.

    "Looks awesome. But, you have to do your research first so that you know what you are doing...." Read more

    "...There were no dead pixels in either strip and brightness and color were uniform and matched between strips...." Read more

    "...The colors are next-level vibrant. I'm talking like, colors so bright they'll make your retinas do a happy dance. Rainbow rave in your room? Easy...." Read more

    "...Weather proofing, solders, leds and overall look was nice but just wouldn't work...." Read more

    44 customers mention41 positive3 negative

    Customers find the string light easy to use and setup. They say it's programmable through whatever software they may be using. They also say it provides an easy-to-use web based interface for setting the color. Customers say the lights are easy to solder to ESP modules for WLED and Home Assistant. They mention that connecting them to the SP511E controller was simple. They have had no issues with the installation, the 90° angles, or the overall function.

    "...open source WLED (available on GitHub), which provides an easy to use web based interface for setting the color, brightness and/or effects of the..." Read more

    "...Setup with WLED running on an ESP8266 was as easy as custom lighting gets...." Read more

    "...They are easy to install, highly efficient, and produce incredibly bright and vibrant colors. If you're looking for LED strips for a project" Read more

    "...Super easy to install, they fit great for my floating shelves and love how they look...." Read more

    28 customers mention20 positive8 negative

    Customers like the value of the string light. They say it's a fun project for under $60, has good quality, and is a nice buy.

    "...Using a ESP32-Dev with WLED to control them. Way cheaper than packaged kits if you are a DIYer. Will be purchasing more of these." Read more

    "...Good as new. These are a really good value for the money!" Read more

    "...Yes, the price is a bit higher than the knockoff ones, but you're paying for reliability...." Read more

    "...QUITE bright, and well worth the money." Read more

    16 customers mention11 positive5 negative

    Customers are mixed about the ease of cutting. Some mention that it's highly versatile, and can be cut to fit any length. They say the ribbon can be easily cut into sections that fit the application, and has little pads to solder on new power and data. However, others say that the rest were cut off, and the cut pieces may not work anymore.

    "All 300 LEDs work. Like that they can be cut to any length and wired into multiple segments. Haven't tried the self adhesive yet...." Read more

    "...I love that you can cut them at each pixel which made maximizing the number of LEDs easy on each side of the scooter deck...." Read more

    "...One of them has a cut in the plastic sleeve, not sure if this is the problem because the other strip is fine but still same issue about the LEDs not..." Read more

    "...The strips are also highly versatile, as they can be cut to fit any length, making them perfect for projects of all sizes...." Read more

    13 customers mention8 positive5 negative

    Customers are mixed about the pixels in the string light. Some mention that there are no dead pixels, while others say that they came with multiple dead pixels.

    "...There were no dead pixels in either strip and brightness and color were uniform and matched between strips...." Read more

    "...all good at this point but not to long after I've had over 10 more dead pixels and they just keep coming, I want to give the seller the benefit of..." Read more

    "Bright, never a dead pixel. Strong outdoor adhesive. Works with my WeMos ESP8266 with no additional components or logic-level shifting." Read more

    "...] This strip looks great, color looks consistent and no dead pixels...." Read more

    41 customers mention7 positive34 negative

    Customers are dissatisfied with the adhesion of the string light. They mention that the adhesive is not good, the tape was pulled off the back, and the strips keep falling off. Some say that the tape is missing from the back.

    "...are sound… even if the connections are all valid, the adhesive isn’t gunna work all twisted like this...." Read more

    "...The adhesive material is not dependable. We had to use glue...." Read more

    "...of the doubt really but it continues to happen and I cant permanently install them because I'm afraid its going to keep happening...." Read more

    "The lights are great, but the adhesion is garbage. If you choose this option plan on having to use a separate adhesion...." Read more

    High quality LED strips!
    5 Stars
    High quality LED strips!
    First up, I’ll talk about the LED strips themselves: As an electrical engineer I can say these are well made strips! Flex PCBs can vary in thickness and quality. These appear to be made from quality flex material with wide 1oz copper traces for power. Each individual LED on the strip has its own 0.1uF decoupling capacitor, which is important to keep communication between LEDs from glitching. (A lot of cheaper strips skip this!)The only issue I ran into was the first strip I ordered didn’t have any adhesive tape on the back of it! I contacted BTF Lighting on Amazon and they replied right away, letting me know that the adhesive should have been on the strip and that someone had goofed at the factory. They provided me an Amazon link to a roll of 10mm wide double sided tape and offered to refund me that amount (around $10) if I wanted to just order it and put it on myself, instead of going through the whole return thing. That’s pretty good customer service in my book, so kudos to BTF! (The second strip *did* have the tape installed as advertised, so I assume this was an oversight at the factor like they said.)Each strip pulls just under 5A with all LEDs set to white at maximum brightness. Cooling didn’t seem to be issue, even rolled up the strip never got so hot I couldn't hold it by hand. There were no dead pixels in either strip and brightness and color were uniform and matched between strips.Now, onto my project: Awhile back I picked up a couple of those Himalayan salt lamps at a Goodwill (I know they don’t actually emit “positive ions” or have any health benefits, I just think they look really cool). They were just begging to be customized, so I decided to replace the stock incandescent nightlight style bulbs with WiFi connected RGB LED lighting! My “lamps” both had (approximately) 3” diameter holes drilled in the bottom of them for the bulbs, so I figured it would be easy to make a cylindrical replacement.These 100 led per meter strips ended up working perfect. Originally, my plan was to wrap the LED strips *around* a 2” diameter piece of PVC piping (cut to 120mm in length). I went for the 100 LED/m instead of the more dense 144 LED/m because I thought the latter may have trouble bending enough to wrap around the small diameter of the pipe. This turned out to be a non-issue as I ended up cutting seven sections of 10 LEDs (100mm) off the roll and mounting them vertically on the pipe; this allows better alignment of the LEDs and easier management of effects in the controlling software. The 100 LED/m strips also have the advantage that the LEDs are all spaced exactly 10mm apart, which makes the math easy!First I wrapped the pipe in two layers of heat resistant Kapton tape, to prevent the pipe melting when I soldered to the LED strips. Next I adhered the seven 100mm sections of LED strip to the pipe, leaving around 10mm of free space on the bottom, I also added three small tie wraps for extra retention. Then I soldered a wire from the DO pad on the top of each section to the DI pad on the bottom of the next section; similarly I soldered very short (3mm) 20 AWG solid wire jumpers from the 5V and GND pads between sections, creating a power bus. The result is that all seven sections act as they original did before I cut them, i.e., a single strip. I also took a 1200uF capacitor and fit it snuggly in the center of the PVC pipe, then soldered the leads to the power pads of the last section. (This helps smooth out the voltage.)Finally, I took some insulating foam designed for 2” PVC piping and cut two 10mm long sections off, then slid one over the top and bottom of the pipe. These turned out to be the perfect size to act as “buffers” to hold the whole assembly centered inside the salt lamp.For the controller, I used an ESP8266 based D1-Mini mounted inside a small 2”x3”x1” enclosure. I drilled a 1/4” hole in one end of the enclosure and a 5/8” hole in the other end. A 5.5x2.5mm barrel jack was mounted in the larger hole and a small rubber grommet was mounted in the smaller hole, with the 3-pin LED connector pigtail fed through the grommet.The software running on the controller is the open source WLED (available on GitHub), which provides an easy to use web based interface for setting the color, brightness and/or effects of the connected LEDs, plus it integrates with Blynk, Alexa, WARLS, MQTT, Home Assistant and more!The attached video shows the fire flicker and rainbow effects running in my smaller lamp. The video really doesn’t do it justice, it looks even better in person. The salt makes a perfect diffuser and people honestly think there’s really a candle inside when the flame effect is going.
    Thank you for your feedback
    Sorry, there was an error
    Sorry we couldn't load the review

    Top reviews from the United States

    Reviewed in the United States on March 1, 2024
    Color: White Pcb Ip30Size: 16.4FT 300LEDVerified Purchase
    Reviewed in the United States on August 20, 2019
    Color: Black Pcb Ip30Size: 3.2FT 100LEDVerified Purchase
    Customer image
    5.0 out of 5 stars High quality LED strips!
    Reviewed in the United States on August 20, 2019
    First up, I’ll talk about the LED strips themselves: As an electrical engineer I can say these are well made strips! Flex PCBs can vary in thickness and quality. These appear to be made from quality flex material with wide 1oz copper traces for power. Each individual LED on the strip has its own 0.1uF decoupling capacitor, which is important to keep communication between LEDs from glitching. (A lot of cheaper strips skip this!)

    The only issue I ran into was the first strip I ordered didn’t have any adhesive tape on the back of it! I contacted BTF Lighting on Amazon and they replied right away, letting me know that the adhesive should have been on the strip and that someone had goofed at the factory. They provided me an Amazon link to a roll of 10mm wide double sided tape and offered to refund me that amount (around $10) if I wanted to just order it and put it on myself, instead of going through the whole return thing. That’s pretty good customer service in my book, so kudos to BTF! (The second strip *did* have the tape installed as advertised, so I assume this was an oversight at the factor like they said.)

    Each strip pulls just under 5A with all LEDs set to white at maximum brightness. Cooling didn’t seem to be issue, even rolled up the strip never got so hot I couldn't hold it by hand. There were no dead pixels in either strip and brightness and color were uniform and matched between strips.

    Now, onto my project: Awhile back I picked up a couple of those Himalayan salt lamps at a Goodwill (I know they don’t actually emit “positive ions” or have any health benefits, I just think they look really cool). They were just begging to be customized, so I decided to replace the stock incandescent nightlight style bulbs with WiFi connected RGB LED lighting! My “lamps” both had (approximately) 3” diameter holes drilled in the bottom of them for the bulbs, so I figured it would be easy to make a cylindrical replacement.

    These 100 led per meter strips ended up working perfect. Originally, my plan was to wrap the LED strips *around* a 2” diameter piece of PVC piping (cut to 120mm in length). I went for the 100 LED/m instead of the more dense 144 LED/m because I thought the latter may have trouble bending enough to wrap around the small diameter of the pipe. This turned out to be a non-issue as I ended up cutting seven sections of 10 LEDs (100mm) off the roll and mounting them vertically on the pipe; this allows better alignment of the LEDs and easier management of effects in the controlling software. The 100 LED/m strips also have the advantage that the LEDs are all spaced exactly 10mm apart, which makes the math easy!

    First I wrapped the pipe in two layers of heat resistant Kapton tape, to prevent the pipe melting when I soldered to the LED strips. Next I adhered the seven 100mm sections of LED strip to the pipe, leaving around 10mm of free space on the bottom, I also added three small tie wraps for extra retention. Then I soldered a wire from the DO pad on the top of each section to the DI pad on the bottom of the next section; similarly I soldered very short (3mm) 20 AWG solid wire jumpers from the 5V and GND pads between sections, creating a power bus. The result is that all seven sections act as they original did before I cut them, i.e., a single strip. I also took a 1200uF capacitor and fit it snuggly in the center of the PVC pipe, then soldered the leads to the power pads of the last section. (This helps smooth out the voltage.)

    Finally, I took some insulating foam designed for 2” PVC piping and cut two 10mm long sections off, then slid one over the top and bottom of the pipe. These turned out to be the perfect size to act as “buffers” to hold the whole assembly centered inside the salt lamp.

    For the controller, I used an ESP8266 based D1-Mini mounted inside a small 2”x3”x1” enclosure. I drilled a 1/4” hole in one end of the enclosure and a 5/8” hole in the other end. A 5.5x2.5mm barrel jack was mounted in the larger hole and a small rubber grommet was mounted in the smaller hole, with the 3-pin LED connector pigtail fed through the grommet.

    The software running on the controller is the open source WLED (available on GitHub), which provides an easy to use web based interface for setting the color, brightness and/or effects of the connected LEDs, plus it integrates with Blynk, Alexa, WARLS, MQTT, Home Assistant and more!

    The attached video shows the fire flicker and rainbow effects running in my smaller lamp. The video really doesn’t do it justice, it looks even better in person. The salt makes a perfect diffuser and people honestly think there’s really a candle inside when the flame effect is going.
    Images in this review
    Customer image Customer image Customer image
    Customer imageCustomer imageCustomer image
    70 people found this helpful
    Report
    Reviewed in the United States on February 22, 2024
    Color: White Pcb Ip30Size: 3.2FT 100LEDVerified Purchase
    2 people found this helpful
    Report
    Reviewed in the United States on August 4, 2020
    Color: Black Pcb Ip67Size: 3.2FT 144LEDVerified Purchase
    Customer image
    5.0 out of 5 stars First set didn't work, replacement and customer service is flawless.
    Reviewed in the United States on August 4, 2020
    As excited as I was for these, they just didn't work. Weather proofing, solders, leds and overall look was nice but just wouldn't work. Tried the 12-5v converter and different power supplies but that didn't seem to help either. Was really hoping for some functioning leds. :( UPDATE UPDATE UPDATE
    UPDATE: after posting my review, BTF took it upon themselves to make it right. Their customer service was quick to reply and gave a handful of possible solutions for the LED strip and possible Bluetooth remote malfunctions, their patience was much appreciated. Unfortunately I recieved a faulty led strip. Not a problem. Like I said, they were determined to make it right. Within a week they got a new led strip my way INCLUDING a new Bluetooth remote which worked flawlessly and I couldn't be more satesfied. Doesn't get better than these.

    UPDATE PT 3! Went a little out of my way and went a different route with the leds and the sp110e bluetooth remote they sent me. Again product works flawlessly, Leds are super bright, they don't get too hot when set to full brightness.. I have the remote connected to both my halos and seperate led strips behind my headlight shrouds. Would highly recommend for projects if you know what you're doing.
    Images in this review
    Customer image Customer image
    Customer imageCustomer image
    6 people found this helpful
    Report
    Reviewed in the United States on November 11, 2022
    Color: Black Pcb Ip30Size: 16.4FT 300LEDVerified Purchase
    2 people found this helpful
    Report

    Top reviews from other countries

    Translate all reviews to English
    José Prieto
    5.0 out of 5 stars Super LED's
    Reviewed in Germany on January 24, 2024
    Color: Black Pcb Ip30Size: 16.4FT 150LEDVerified Purchase
    MW
    4.0 out of 5 stars Lovely Light
    Reviewed in the United Kingdom on September 30, 2023
    noesen lydia
    5.0 out of 5 stars Beleuchtung
    Reviewed in Germany on September 9, 2023
    Color: White Pcb Ip67Size: 16.4FT 150LEDVerified Purchase
    David m.
    4.0 out of 5 stars Bonitos pero consumen mucho
    Reviewed in Spain on March 27, 2023
    Color: White Pcb Ip67Size: 16.4FT 150LEDVerified Purchase
    Ignacio Aguirre Miranda
    2.0 out of 5 stars WS2812B ni funcionaba 2 píxeles
    Reviewed in Mexico on October 16, 2020
    Color: Black Pcb Ip30Size: 16.4FT 300LEDVerified Purchase