Brand | Grizzly |
---|---|
Color | Black |
Blade Material | Iron |
Surface Recommendation | Floor |
Power Source | 3-horse-power |
Special Feature | Brake |
Included Components | bare-tool; attachments |
Voltage | 220 Volts |
Item Weight | 462 Pounds |
Speed | 4300 RPM |
Blade Length | 10 Inches |
Number of Teeth | 50 |
Cutting Angle | 90 Degrees |
Manufacturer | Grizzly |
Part Number | G0690 |
Item Weight | 462 pounds |
Product Dimensions | 24 x 30 x 43 inches |
Item model number | G0690 |
Is Discontinued By Manufacturer | No |
Size | 40" W x 27" D |
Style | Grizzly |
Item Package Quantity | 1 |
Special Features | Brake |
Batteries Included? | No |
Batteries Required? | No |
Image Unavailable
Color:
-
-
-
- To view this video download Flash Player
- VIDEO
Grizzly G0690 Cabinet Table Saw with Riving Knife, 10-Inch
Delivery & Support
Select to learn moreOur specialist Customer Support for large items dispatched from Amazon is on hand to help with your order. Contact us via phone or chat 7 days a week.
Brand | Grizzly |
Color | Black |
Blade Material | Iron |
Surface Recommendation | Floor |
Power Source | 3-horse-power |
About this item
- Arbor speed: 4 300 RPM Arbor size: 5/8-Inch; Maximum dado width: 13/16-Inch Maximum rip capacity: 291/2-Inch
- Maximum dado width: 13/16-Inch Maximum rip capacity: 291/2-Inch
- Maximum depth of cut @ 90-Degree: 3-1/8-Inch Maximum depth of cut @ 45-Degree: 2-3/16-Inch
- Motor: 3 HP 220V single-phase Lesson
- Table height from floor: 34-Inch Table size with extension: 27-Inch x 40-Inch Overall dimensions: 62-InchL x 41-InchW x 40-InchH
Customers who viewed this item also viewed
- JET 10-Inch Deluxe XACTA Table Saw, 30-Inch Rip, 3 HP, 1Ph 230V (JTAS-10XL30-DX)Amazon's Choicein Table SawsFREE ShippingGet it Friday, Apr 5Only 1 left in stock - order soon.
- DEWALT (DWE7491RS) 10-Inch Table Saw, 32-1/2-Inch Rip Capacity, Yellow/Black/Silver18% offLimited time dealFREE Shipping by AmazonGet it as soon as Tuesday, Apr 2
Product Description
Every part of this saw says quality & performance. From its heavy cast iron trunnions, 3 HP Leeson motor & triple belt drive to its massive cast iron table & wings, this Table Saw should last a lifetime. YouÕll also appreciate its camlock T-fence, riving
Looking for specific info?
Videos
Videos for this product
14:23
Click to play video
Cabinet Video Amazon
Merchant Video
Product information
Technical Details
Additional Information
ASIN | B0029VN2SA |
---|---|
Customer Reviews |
3.7 out of 5 stars |
Date First Available | May 13, 2009 |
Warranty & Support
Feedback
Compare with similar items
This Item Grizzly G0690 Cabinet Table Saw with Riving Knife, 10-Inch | Recommendations | dummy | dummy | dummy | |
Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | ||
Price | Currently unavailable. | $1,899.99$1,899.99 | -18% $549.00$549.00 List: $669.00 | -10% $3,059.99$3,059.99 Typical: $3,399.99 | $3,398.00$3,398.00 |
Delivery | — | Get it Apr 4 - 10 | Get it as soon as Tuesday, Apr 2 | Get it Friday, Apr 5 | Get it Apr 8 - 12 |
Customer Ratings | |||||
Safety Features | — | — | 4.6 | 3.5 | 4.8 |
Accuracy | — | — | 4.5 | 4.5 | 5.0 |
Sold By | — | Jacks Small Engines | Amazon.com | Amazon.com | CPO Outlets |
blade length | 10 inches | 10 inches | 10 inches | 10 inches | 10 inches |
power source | 3-horse-power | Corded Electric | Corded Electric | Corded Electric | 5-horse-power |
speed | 4300 rpm | 4000 rpm | 4800 rpm | 4300 rpm | — |
blade material | Iron | Steel | High Speed Steel | High Speed Steel | Stainless Steel |
number of teeth | 50 | 50 | 24 | 50 | — |
included components | bare-tool; attachments | Saw, Fence, Rails, Blade Guard, Steel Wings, Riving Knife (x2), Blade (pre-installed), Miter Gauge, Hardware | (1) Rolling Stand (1) Push Stick (1) Miter Gauge (1) Rip Fence (2) Blade Wrenches (1) Blade Guard Assembly (1) 10" 24-Tooth Carbide Blade | Fence, blade, table saw, miter gauge, rails, riving knife, blade guard | bare-tool |
cutting angle | 90 degrees | — | 90 degrees | 90 degrees | 90 degrees |
voltage | 220 volts | 115 volts | 0 volts | 230 volts | 110 volts |
weight | 462 pounds | 235.7 pounds | 110 pounds | 407 pounds | 471.4 pounds |
Important information
220 volts
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers like the quality, sturdiness, ease of adjustment, and value of the saw. They mention that it rips completely effortlessly, and is well constructed. They appreciate the smooth and accurate fence. Overall, customers find it to be a great value and a good product.
AI-generated from the text of customer reviews
Customers are satisfied with the quality of the saw. They mention that it is a great product, well constructed, and easy to assemble. The cutting performance on materials mentioned is excellent, and the cuts are square to the face.
"...Cutting performance on materials mentioned is excellent and the cuts are square to the face...." Read more
"...It does cut well. I put a Frued 60T blade in. It runs vibration free and adjust easily...." Read more
"...runs on a standard 20v circuit Precise adjustments Looks great Included an insert for a dado blade Many components..." Read more
"...well, it's sturdy, it hasn't rusted, it's true, the riving knife is extremely helpful in preventing burnout and I haven't had a single kickback on..." Read more
Customers appreciate the sturdiness of the saw. They say it's well constructed, with quality parts and pieces. The saw rips completely effortlessly and dados like butter.
"...Tuning was done very carefully but was easy because of the quality workmanship...." Read more
"...Other than that it seems fairly well made ( in China ) thats why it so affordable. Everything is metric so be ready for that...." Read more
"...The Good: Very well written manual Quality parts and pieces Assembled easily Table was properly finished..." Read more
"I've owned it for 2 years now and it holds it's calibration well, it's sturdy, it hasn't rusted, it's true, the riving knife is extremely helpful in..." Read more
Customers find the adjustment of the saw to be easy. They mention that the fence is smooth and accurate, and the tuning was done very carefully.
"...Tuning was done very carefully but was easy because of the quality workmanship...." Read more
"...I put a Frued 60T blade in. It runs vibration free and adjust easily...." Read more
"Heavy and solid. Sturdy. Easy to maintain and to adjust. Accurate. Great fence. Leeson motor and triple V belt...." Read more
"...Awesome machine and fence is as smooth and accurate as it gets." Read more
Customers find the saw easy to assemble.
"...Very well written manual Quality parts and pieces Assembled easily Table was properly finished Smooth start and..." Read more
"...It was easy to assemble. With the base that I put the saw on I can put away when I am finished...." Read more
"Fully exceeded my expectations! The setup was relatively easy with a helper...." Read more
"...Set up was fairly easily and the results are great. this has made woodworking so much more fun and easy...." Read more
Customers appreciate the value of the saw. They say it's a great product.
"...removed easily, moved unit with 800lb dolly easily Competitively pricedOverall:..." Read more
"...Nope, a true cabinet saw make things OH-SO-MUCH-BETTER. A great value and a great product." Read more
"Best saw for the price..." Read more
"Best saw for the money!..." Read more
Reviews with images
-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
It took approximately 3 days before I had it assembled and tuned but that is just me and your time will vary. Tuning was done very carefully but was easy because of the quality workmanship. Once the table was set to the blade everything else fell into place with minimum adjustment. This was really hard for me to handle as my previous saw was a low-end 1.75 HP table saw with all its faults However, I quickly adapted (laughs). Although I did not micro measured everything, the table passed the ruler test and squared up nicely with the blade with minimum fuss. The fence fell right into place without any adjustment and stayed that way through movement...amazing.
At this point, which is approximately 20 days after set-up I am very pleased with the purchased and wondered why I didn't do this a long time ago. There were three issues. The splitter tighten clip was cockeyed and made it extremely difficult to affix and extract the riving knife and blade guide. Once I did the test run, the lower holding motor bolt fell out of the engine mount. The third issue was the power cord which was much too short. It was only six feet in length...much much too short to be adaptable to individual shop layouts.
The first and second issues were easily corrected, one with a call for a replacement part and the other with replacing the missing cotter pin. The third issue was a little more difficult. I needed only an additional six-ten feet for the saw to be fully functional within location limitations. In order to fulfill this need, I was forced to purchase the individual parts of an extension and assemble to completion; I do think that the power cord should be at least twelve feet from the factory.
In summary, very please so far with the purchase. Although not graded as a high end 3 HP table saw that costs upward from $3,500 to $5,000 dollars, the Grizzly G0690 more than fulfills the essential strengths needed in a quality performance tool. I received excellent service from the delivery person to the employees of Grizzly. Although my throat hit my stomach when I heard the punk of the bolt, it turned out to be a minor problem. all issues were minor and quickly corrected except for the power cord length.
Yes. I would recommend this product and because of my positive experience, I will be looking in purchasing my band saw from the same source
This is a follow-up of my first review In May, 2013 of the Grizzly G0690 table saw. It has been six months since my purchased and set up of the saw.
As initially experience the saw still performs marvelously. At this point in my hobby career, I am more involved with case work with face frames and an occasional 2x4 construction lumber milled for specific purposed shop cabinets. I have yet to try any larger lumber dimensions or any wood harder than red oak. Cutting performance on materials mentioned is excellent and the cuts are square to the face.
Although, I am somewhat zealous to details, I tend not to over think the set-up particulars of any woodworking machine. I use the result maxim that states if the cut is square and accurate than the setup is good enough. So, with this philosophy in hand, I make notes of possible improvements to consider and attend to them after completion of each project. Subsequently, I have since added a zero clearance insert, an Inca cross cut fence, a dado set, and am presently attending to some perceived vibration issues.
My machine does not pass the nickel test any more so I checked for loose belts and/or loose bolts. The deflections of the belts were within norms per the manual and no loose bolts were found. Since it really is not a big issue and has not affected the trueness of the cuts, I will just keep an eye on it. The fence, although squared to the blade, is raised off the table about a quarter of an inch on the front side and an eighth of an inch on the backside. No amount of adjusts to the fence seem to work while still maintaining the trueness to the blade. I am considering lowering the guild tube or the front/back rails or a combination of both. I am also considering moving the rails to the right, thus extending the right side cutting distance by two to three inches.
So far, the mobile base purchased with the saw has performed flawlessly. This was an initial concern due to some negative reviews read. My lovely wife has graciously allowed me an allowance for major tool purposes, no questions asked. A woodworker's dream, no hassle toy acquisitions...lol! Since my balance for the saw has been paid off this December, I am looking to purchase a 17 inch extreme bandsaw and a two horse power dust collector system; all from Grizzly of course. Merry Christmas to me!
In summary, I am very pleased with this purchase and my relationship with Grizzly's personal. The aforementioned adjustments are really expected at this point or are a minimal intrusion of my time. I will do one more review in six months on the saw. I have one suggestion thought, after reviewing Amazon's current selling price on the saw I do recommend a direct purchase from Grizzly.
First, the saw is sturdy, well made, and came out of the box tuned perfectly. I have a Powermatic jointer and band saw in my shop as well, and I would say this piece of equipment is on par with them for quality. That being said, I'm still a new owner, so time will tell. As everyone has said, there was a significant amount of protective grease all over, but I'm good with that, because it did its job and protected well. Instruction manual was also very good and clear.
Now the Ugly, and mind you, based on other reviews I expected good customer service ... The saw arrived the 26th of December, boxes had no visible damage, and after about 5 hours of assembly (I took my time, so not bad) I got to the fence. After closer inspection on the fence I noticed chipped paint on the fence head, but decided to go ahead and set it up anyway. It was then that I noticed that the paint was chipped because the head was bent.
I contacted Grizzly the next day and sent pictures that day as well. I was told someone would get back to me within 48 hours. A week later, they finally contacted me with a plan, which required that I put the fence in the mail back to them before they would ship anything to me. This required that I receive the shipping information and a shipping label via an email from UPS. After two days of waiting for the shipping label I demanded to talk to a supervisor and that they send the replacement fence now, it finally got to me two weeks from the initial complaint. Not only that, but the shipping label wasn't sent to me until I sent their customer service a draft of this review. Had I just waited on Grizzly, I would likely still be without a shipping label or a good fence. Also, their customer service has still not addressed why it took so long, nor have they tried to make it right.
So in the end, after a phone call almost every day for a week and a half, and only because I demanded it, did the customer service team finally get the fence to me two weeks after delivery. There was absolutely zero concern that I had just paid over $2100, including delivery and the mobile base, to get this saw, and was waiting on a virtually unresponsive team for a component because they were concerned more about getting their part back than replacing the broken one (a relatively inexpensive part I assume as well).
The overall response to the draft of this post from the "customer service" team was that they followed their policy and I was fortunate that they sent the part to me before I shipped the broken fence to them. Clearly customer service is just the name of a department with no real ability to appropriately respond to customers. I am so disappointing that I had considered stopping credit card payment and returning the item, but I'm not sure that further escalation does anyone any good at this point.
I am happy with the saws performance, but will likely never purchase a Grizzly product again because I expect quality customer service to accompany a quality product.