So understand from the beginning what you are buying and you'll be good to go. This is a zero frills workhorse printer. Large capacity for bigger prints. Handles multiple different materials. High quality prints with minimal setup.
Understand this is a smooth glass build surface. Prints will NOT stick to this without some type of assistance (I suggest glue stick) it does come with some textured masking tape which works very well. If you're going to keep going with masking tape be sure to buy the good stuff with rough texture. The smoother it is the worse it will adhere.
Aside from that this thing gets the job done. Very fast setup, good build quality, sturdy materials. While not recommended for a person who has never printed before it is a great midlevel printer.
Commit to the learning curve and it won't let you down.
Similar items that may ship from close to you
Page 1 of 1 Start overPage 1 of 1
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
6:15
Click to play video
Creality CR-10 product Test review
CREALITY HYD STORE
Product Description
CR-10
CREALITY CR-10 SERIES
11.81"*11.81"15.74" | BUILDING AREA | 11.81"*11.81"15.74" |
DUAL Z-AXIS MOTOR | | |
FILAMENT SENSOR | | |
Resume Printing | | |
CR-TOUCH |
11.81"*11.81"15.74" | BUILDING AREA | 19.68"*19.68"*19.68" |
DUAL Z-AXIS MOTOR | | |
FILAMENT SENSOR | | |
Resume Printing | | |
CR-TOUCH | |
11.81"*11.81"15.74" | BUILDING AREA | 11.81"*11.81"15.74" |
DUAL Z-AXIS MOTOR | | |
FILAMENT SENSOR | | |
Resume Printing | | |
CR-TOUCH |
11.81"*11.81"15.74" | BUILDING AREA | 11.81"*11.81"15.74" |
DUAL Z-AXIS MOTOR | | |
FILAMENT SENSOR | | |
Resume Printing | | |
CR-TOUCH | |
THE DIFFERENCE AMONG CREALITY 3D PRINTER CR-10/10S/10S 5?
 CREALITY CR-10 |  CREALITY CR-10S |  CREALITY CR-10S 5 |
|---|---|---|
THE ORIGINAL CR-10Print size 300×300×400mm | UPDATE FOR CR-10Print size 300×300×400mm | UPDATE FOR CR-10SPrint size 500×500×500mm |
SINGLE Z-AXIS AND SINGLE MOTORpowerful and stable | DUAL Z-AXIS AND DUAL MOTORMore powerful and stable | DUAL Z-AXIS AND DUAL MOTORMore powerful and stable |
THE EARLIEST FDM 3D PRINTERSThe Earliest Large FDM 3d Printers than Enders | FILAMENT SENSOREnsure the model can be smoothly printed when out or disconnected | AUTO LEVELINGCR10-S5 new version comes with CR touch |
Reviews with images
Pretty decent printer would probably lower the price
To start of a little costly but let’s get Into itPros1. Basically in my opinion it’s 50% built you basically just screw part frame A to part frame B lol and plug in wires really simple2. Everything is included to print right out of the box no extras needed I mean unless you want other colors lol3. Program and guide included on a cute tinny USB4. Came with a glass bed5. Really easy to use and print6. You can leave it unattended I have for hrs and it works fine turns off after finishing the print I mean it turns the extruder and bed heat off but stays on the lcd screen7. Print quality is depending on how fast and I guess how leveled the bed is I had a crappy test dog and then moved the print to the right sided adjusted a few things and the dog was fabulous8. Free pla and heated tape in the box I’ll post pictures of where I found my tape and what my prints look like as well as a videoAt the moment I’m using Hatchbox play and I have the temp of nozzle at 198c and bed at 65-70c depending on size and what speed is changed on what I’m doing with the dogs I did 100 and with my headphone holder same speed 100Now the ConsCons1. The glass bed is really hard to use or even level the bed with even after that it’s hard to get anything to stick on it might be a little to thick in my opinion because tape glue and hair spray was a no go on the glass bed it would shift or move bend or ball up on the nozzle tape and the plan metal bed works fabulous lol2. HOLY SKETCHY USB STICK LOL like seriously a plan usb with a gray pickle with foreign language on it and at that the usb stick reads a micro SD card so okay 👌🏻 😂 I got ride of it and used a 16gig works just make sure to get the files first the usb is safe it’s just so small I got a larger one hahahaha nothing bad happened I just personally would lose such a small usb stick hahaha3. The book guides are brain aneurism seriously 😂 just go to the usb stick guide 😂4. The leveling is really hard not for beginners they should add something to help with that honestly lol because I have a sheet of glass on my table now5. The white free pla that’s in the box tangled up and almost burned out my extruder lol so look closely at it when using it
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on November 29, 2022
Reviewed in the United States on October 21, 2019
Reviewed in the United States on April 25, 2019
Reviewed in the United States on June 23, 2019
Pros
1. Basically in my opinion it’s 50% built you basically just screw part frame A to part frame B lol and plug in wires really simple
2. Everything is included to print right out of the box no extras needed I mean unless you want other colors lol
3. Program and guide included on a cute tinny USB
4. Came with a glass bed
5. Really easy to use and print
6. You can leave it unattended I have for hrs and it works fine turns off after finishing the print I mean it turns the extruder and bed heat off but stays on the lcd screen
7. Print quality is depending on how fast and I guess how leveled the bed is I had a crappy test dog and then moved the print to the right sided adjusted a few things and the dog was fabulous
8. Free pla and heated tape in the box I’ll post pictures of where I found my tape and what my prints look like as well as a video
At the moment I’m using Hatchbox play and I have the temp of nozzle at 198c and bed at 65-70c depending on size and what speed is changed on what I’m doing with the dogs I did 100 and with my headphone holder same speed 100
Now the Cons
Cons
1. The glass bed is really hard to use or even level the bed with even after that it’s hard to get anything to stick on it might be a little to thick in my opinion because tape glue and hair spray was a no go on the glass bed it would shift or move bend or ball up on the nozzle tape and the plan metal bed works fabulous lol
2. HOLY SKETCHY USB STICK LOL like seriously a plan usb with a gray pickle with foreign language on it and at that the usb stick reads a micro SD card so okay 👌🏻 😂 I got ride of it and used a 16gig works just make sure to get the files first the usb is safe it’s just so small I got a larger one hahahaha nothing bad happened I just personally would lose such a small usb stick hahaha
3. The book guides are brain aneurism seriously 😂 just go to the usb stick guide 😂
4. The leveling is really hard not for beginners they should add something to help with that honestly lol because I have a sheet of glass on my table now
5. The white free pla that’s in the box tangled up and almost burned out my extruder lol so look closely at it when using it
Pretty decent printer would probably lower the price
Reviewed in the United States on June 23, 2019
To start of a little costly but let’s get Into itReviewed in the United States on June 23, 2019
Pros
1. Basically in my opinion it’s 50% built you basically just screw part frame A to part frame B lol and plug in wires really simple
2. Everything is included to print right out of the box no extras needed I mean unless you want other colors lol
3. Program and guide included on a cute tinny USB
4. Came with a glass bed
5. Really easy to use and print
6. You can leave it unattended I have for hrs and it works fine turns off after finishing the print I mean it turns the extruder and bed heat off but stays on the lcd screen
7. Print quality is depending on how fast and I guess how leveled the bed is I had a crappy test dog and then moved the print to the right sided adjusted a few things and the dog was fabulous
8. Free pla and heated tape in the box I’ll post pictures of where I found my tape and what my prints look like as well as a video
At the moment I’m using Hatchbox play and I have the temp of nozzle at 198c and bed at 65-70c depending on size and what speed is changed on what I’m doing with the dogs I did 100 and with my headphone holder same speed 100
Now the Cons
Cons
1. The glass bed is really hard to use or even level the bed with even after that it’s hard to get anything to stick on it might be a little to thick in my opinion because tape glue and hair spray was a no go on the glass bed it would shift or move bend or ball up on the nozzle tape and the plan metal bed works fabulous lol
2. HOLY SKETCHY USB STICK LOL like seriously a plan usb with a gray pickle with foreign language on it and at that the usb stick reads a micro SD card so okay 👌🏻 😂 I got ride of it and used a 16gig works just make sure to get the files first the usb is safe it’s just so small I got a larger one hahahaha nothing bad happened I just personally would lose such a small usb stick hahaha
3. The book guides are brain aneurism seriously 😂 just go to the usb stick guide 😂
4. The leveling is really hard not for beginners they should add something to help with that honestly lol because I have a sheet of glass on my table now
5. The white free pla that’s in the box tangled up and almost burned out my extruder lol so look closely at it when using it
Images in this review
