対応機種 | 一眼レフ、スマホ、ビデオカメラ |
---|---|
カラー | 「第2代」自由雲台付きミニ三脚 |
電池付属 | いいえ |
電池使用 | いいえ |
ブランド名 | SMALLRIG |
メーカー | SMALLRIG |
製品型番 | 2664 |
その他 機能 | 軽量 |
サイズ | 「第2代」自由雲台付きミニ三脚 |
素材 | アルミニウム |
梱包サイズ | 26.3 x 10.9 x 7.1 cm; 410 g |
商品重量 | 410 グラム |
プライム無料体験をお試しいただけます
プライム無料体験で、この注文から無料配送特典をご利用いただけます。
非会員 | プライム会員 | |
---|---|---|
通常配送 | ¥410 - ¥450* | 無料 |
お急ぎ便 | ¥510 - ¥550 | |
お届け日時指定便 | ¥510 - ¥650 |
*Amazon.co.jp発送商品の注文額 ¥2,000以上は非会員も無料
無料体験はいつでもキャンセルできます。30日のプライム無料体験をぜひお試しください。
SmallRig ミニ三脚 一眼レフカメラ三脚 コンパクト アルカスイス自由雲台付き三脚 アルミ製- BUT2664
-
SmallRig Shopから対象商品を1個以上購入すると、SmallRig BMPCC 6K Pro専用フルケージ 3382Bが50%割引になります。 買い物をする
購入オプションとあわせ買い
ブランド | SMALLRIG |
色 | 「第2代」自由雲台付きミニ三脚 |
対応デバイス | 一眼レフ、スマホ、ビデオカメラ |
特徴 | 軽量 |
材質 | アルミニウム |
商品の重量 | 410 グラム |
重量制限 | 3 キログラム |
モデル名 | BUT2664 |
最大高 | 23 センチメートル |
三脚ヘッドタイプ | ボール雲台 |
この商品について
- 【頑丈&安心】:ミニ三脚は、耐久性があり、壊れにくいアルミ合金素材でできて、脚の部分の最大負荷重量は80kgまで、雲台部分の耐荷重は5KGで。六角レンチで三脚の開脚を調節できため、カメラを安心して置きます。
- 【360度ボール雲台】 卓上三脚の調整可能なボールヘッドにより、 カメラやスマホなどを360度回転パノラマ撮影できます。1/4インチと3/8インチネジがあり、一眼レフ、スマホ、ビデオカメラと互換性があります。
- 【クイックリリースクランプ】クイックリリースクランプArca-Swiss規格に準拠する。クイックシューはカメラ守るゴムが貼り付けて、脱落防止のネジがあり、迅速に調節できます。クイックインストールとリリースを実現可能!
- 【滑り止めゴム製の足足元】:滑り止めゴム製の足元のデザインは、足のグリップは坂道でも滑らない使用時に完璧な安定性を達成するためにミニカメラ三脚を保護します。
- 【軽量&ポータブル】:ミニ三脚は小型でわずか405gと230mmです。 それはコンパクトで、どこへ行ってもバックパックやハンドバッグにに簡単に収納できます。
よく一緒に購入されている商品

この商品をチェックした人はこんな商品もチェックしています
商品の情報
詳細情報
登録情報
商品モデル番号 | 2664 |
---|---|
ASIN | B082XRWZD9 |
Amazon.co.jp での取り扱い開始日 | 2019/12/30 |
おすすめ度 |
5つ星のうち4.0 |
Amazon 売れ筋ランキング | - 37,001位家電&カメラ (家電&カメラの売れ筋ランキングを見る) - 122位カメラ用三脚 |
保証とサポート
ご意見ご要望
ブランド紹介

-
2009年に会社を設立、2012年に「SmallRig」というブランドを立ち上げました。
User Collaborative DesignモードとDreamRigプログラムを立ち上げ、カメラマンなどの撮影従業者の依頼でDIY品を開発することをきっかけに、より多くの撮影愛好者へも便利グッズを提供できたらっと、ネット通販でのビジネスを開始しました。また、顧客中心という開発理念を重視のため、ユーザーとの需要のズレを防ぐことができます。当社のアクセサリーは、生配信、Vlog、プロのビデオ制作などの分野で広く使用されており、各国のお客様に愛用されています。
-
-
-
-
-
-
商品の説明


商品の特徴
- 卓上三脚はカメラや携帯電話の撮影に最適です。
- アルミ合金製で、より良い支持力で作られています。
- 滑り止めのゴム製フットパッド設計により、デスクトップの三脚が滑るのを防ぎます。
- コンパクトで持ち運び可能な、閉じた三脚はハンドルとして使用できます。
- マルチアングル調整と360°パノラマ写真を実現可能。
- 1/4インチネジと標準的なアルカQRプレートがあり、クイックインストールとリリースを実現可能。
|
|
|
---|---|---|
迅速に調節可能
|
360度回転可カメラを任意角度を簡単に設定できます。縦、横でも簡単に調整が可能です。 |
パッケージ内容1つ三脚、1つボールヘッド、 1つQRプレート、1つ六角レンチ 六角レンチを使用して脚のボルトを締め、1/4インチのネジをすばやく外します。 |
幅広い互換性
|
|
|
|
---|---|---|---|
スマートフォン |
カメラ |
プロジェクター |
GoPro |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
自由雲台 | 自由雲台 | ビデオ雲台 | ミニ三脚 | 汎用ビデオキット | 汎用ビデオキット | |
カスタマーレビュー |
5つ星のうち4.0
702
|
5つ星のうち4.2
203
|
5つ星のうち4.0
102
|
5つ星のうち4.2
110
|
5つ星のうち4.5
432
|
5つ星のうち4.3
14
|
価格 | ¥2,899¥2,899 | ¥4,179¥4,179 | — | ¥3,229¥3,229 | ¥23,599¥23,599 | — |
特徴 | 流体ヘッド付き雲台 | アルカスイスプレート | 360°回転 | 360°回転&パノラマ撮影 | ユニバーサル電話スタンド、2つのサイドハンドル、ミニ三脚、LEDライトが含む | 曲げ可能なコンパクト三脚 |
耐荷重 | 3kg | 5kg | 279g | 1.5kg | 1.24kg | 1.5kg |
類似商品と比較する
この商品 ![]() SmallRig ミニ三脚 一眼レフカメラ三脚 コンパクト アルカスイス自由雲台付き三脚 アルミ製- BUT2664 | おすすめ | dummy | dummy | dummy | dummy | |
もう一度お試しください 追加されました | もう一度お試しください 追加されました | もう一度お試しください 追加されました | もう一度お試しください 追加されました | もう一度お試しください 追加されました | もう一度お試しください 追加されました | |
価格 | ¥5,499¥5,499 | ¥4,580¥4,580 | ¥2,699¥2,699 | ¥9,090¥9,090 | -29% ¥3,735¥3,735 参考: ¥5,280 | ¥4,499¥4,499 |
配達 | 最短で3月21日 木曜日のお届け予定です | 最短で3月21日 木曜日のお届け予定です | 最短で3月21日 木曜日のお届け予定です | 最短で3月21日 木曜日のお届け予定です | 最短で3月21日 木曜日のお届け予定です | 最短で3月21日 木曜日のお届け予定です |
お客様の評価 | ||||||
軽さ | 3.8 | — | 4.0 | — | 3.9 | — |
安定性 | 3.7 | — | 5.0 | — | 4.4 | — |
販売元: | SmallRig Shop | SZZJ Technology Co., Ltd. | Yide Photography Store | SmallRig Shop | FALCAM Direct | XILETU Official Store |
対応端末 | 一眼レフ、スマホ、ビデオカメラ | スマートフォン, カメラ | カメラ | スマートフォン, カメラ | スマートフォン, カメラ | スマートフォン, カメラ |
三脚ヘッドタイプ | ボール雲台 | ボール雲台 | ボール雲台 | パノラマ雲台, ボール雲台 | ボール雲台 | ボール雲台 |
材質 | アルミニウム | アルミニウム | アルミニウム | アルミニウム | アルミニウム | ゴム, アルミニウム |
特定の情報をお探しですか?
イメージ付きのレビュー

-
トップレビュー
上位レビュー、対象国: 日本
レビューのフィルタリング中に問題が発生しました。後でもう一度試してください。
安定性はあります。
調べてみると、この商品の対荷重が3kgのところ私のカメラと望遠レンズで約2.3kg、対荷重は余裕があるくらいの物を買うほうがいいです。
結論から言うと固定が弱く、いく先々で一脚の角度がずれます。また、カメラとのマウント部もしっかり固定しようとすると力が要ります。ネジ摘み部が細く回しにくく感じます。
結論として、SONYα6000シリーズくらいの大きさで標準ズーム程度の重量のものを三脚で使用するのがこの製品には良い使い方と思います。
安い割に安定した動きで、思いレフ機を乗せても
しっかり安定して固定できる。
他の国からのトップレビュー


Right off the bat, neither of them has a specific name; only their model numbers are a title differentiator: the smaller one without a head is the 2288 and the larger, with a ball head, is the 2287.
I'm going to break these down one at a time for you, so you can get both the cons and pros of both. Because the specs of these tripods are in the links provided, I'll be giving you each thought I had from every aspect that the tripods give us...something that most of us, as creators, would rather have anyway: first hand experience.
Table top tripod 2288
CONS:
The rubber pads on the bottom of each leg don't wrap around...at all really. And because of that, the pads aren't exactly enough to grip the surface if the legs are spread out even a little more than half-way. On that same note, the pads are a little too slippery as a whole, and I'd be hesitant to put a mirrorless camera on this tripod for fear of the weight being too much for them, but I'd still be completely comfortable having a light or an action camera on it.
Beyond the pads, the legs are held in place by a single allen bolt and mine didn't come as tight as they could have been, which is what made my legs cave out under the stress of the weight.
The fact that this tiny tripod only has those few "cons" is fantastic. Because, as you'll soon find, the "pros" far outweighs these.
PROS:
Staying on the point of the allen bolt, the problem is quite easily fixed: just tighten it with an allen wrench. The legs won't give out anywhere near as easily...though it still doesn't help with the rubber pads issue.
The tripod is WAY tougher in my hands than it looked in the pictures, and the fact that it's so skinny makes it super lightweight.
Each leg has a single 1/4 20mm hole (which is fantastic for mounting those lightweight accessories), though I feel that the placement of the holes is just too far down on each leg for vloggers to be able to use this specific tripod as a handheld option and still be able to use the holes. So, as far as using it on for table top/on any surface, the holes can definitely be utilized.
The top of the tripod has a 1/4 20mm mount for you to be able to use most ball head options...or phone clamps/mounts, or action camera mounts. Basically, that means you can make your table top rig completely customized.
Table top tripod 2287
CONS:
Okay...so I opened the box (after already having opened the 2288) and immediately noticed that the larger of the two tripods does not have female 1/4 20mm mounts on the legs. I find that a bit strange, but I'm sure SmallRig had their reasons.
Though the individual allen bolts were already good and tight on each leg, they're still bolts. Bolts that I would have to tighten or loosen with an allen wrench in order to have the legs to my liking/needs, which means always having one on me.
The screw that comes inserted into the arca swiss plate is a basic 1/4 20mm that you would need a flathead screwdriver or nickel (because we've all done it) to tighten or loosen it. I find it strange that it couldn't come with a d-ring 1/4 20mm (that SmallRig already makes) so that it could be handled with a single hand instead of another tool.
On the last "con" note, the screw that is holding the ball head onto the tripod is a 3/8 instead of 1/4 20mm. It's not so much that it's bad, but it does limit your mounting options if you want to switch out the head for another one, but I do like that a 3/8 does tend to give more strength to the joint...so it's kind of bad and good at the same time.
INTERESTING:
Yes, that's right, there's an interesting note to this tripod...specifically it's about the ball head. Actually, it's even more than that: the knobs on the ball head. The knobs have TENSION RELEASE ability! What I mean by that is: after you tighten the knobs for panning and the ball head position, you can pull the knobs straight out and turn them without tightening or loosening, and then let it go and they'll pull back in. Basically, what that means is that you can have the knobs be in other positions after they've been tightened so that they're not in the way of cables...or, if you have OCD like me, it's nice to not have them in odd positions or facing different ways.
PROS:
It comes with the allen wrench that you'll need to tighten or loosen the bolt for each leg so that you won't have to buy one.
It comes with a ball head attached already (as you probably already gathered from one of my previous comments) that is fitted for arca swiss...and also has it's own plate ready for mounting.
The rubber pads on the bottom are definitely big enough to have the legs sit in almost any position and have great amounts of grip to all indoor surfaces and most outdoor ones, too. One caveat, however: I wish the pads fully encompassed the bottoms of the legs so that there would be grip in all positions, not just most.
Just like the smaller model, this thing is INSANELY robust. This is a huge note because I feel that the most obvious competitor is the batch of mini tripods that Manfrotto has out that (in my opinion) all look like they'd break under the strain of a single camera and decent lens.
FINAL THOUGHTS:
Though small, both have massive potential. I will probably use the smaller (2288) model sparingly...perhaps to hold a LED (as shown above) or mic; whereas with the larger (2287) model (and this is me being honest with how absolutely surprised I am with it), I believe it's going to replace my Joby gorillapod. Yes, you read that right.
My reasons are simple: I don't use the versatility of the gorillapod's legs as others might. For most of my footage (both for myself and through collaborations), I use it mainly for its vlogging ability. And because we all know that the legs of the gorillapods give out over time (much more quickly for some of us than others), I'd rather have my expensive gear be sitting on something a little more stable, and much quicker to get the legs into position on.
Are they worth your small investments? That depends on your needs. SmallRig: nice job! Keep up the good work. And I hope you will consider my thoughts for your next table top tripod design.
*all photos were taken on the iPhone X with Moment lenses and the Moment camera app*

Daher suchte ich ergänzend noch ein kleines, handliches Stativ, das man völlig problemlos in einer Handtasche, einem kleinen Rucksack oder ähnlichem mitnehmen kann. Das habe ich gefunden!
Das Stativ ist erstaunlich stabil und kippsicher.
Zwar habe ich es mir eher nur fürs Smartphone gekauft - aber ich habe versuchsweise auch mal meine Spiegelreflex-Kamera aufgeschraubt und das war absolut unproblematisch. Das hat mich schon sehr beeindruckt.
Auch auf eher unebenen Flächen, wie beispielsweise einer Mauer oder einem Baumstamm, steht es dank des Dreibeins sehr fest.
Die kleine Wasserwaage ermöglicht eine einwandfreie horizontale Ausrichtung.
Die Schrauben und der Schnellspanner machen einen soliden Eindruck.
Ebenso wie das komplette Stativ sehr robust und hochwertig erscheint.
Ja, es ist nicht unbedingt preiswert - aber wenn ich etwas Billiges will, erhalte ich auch etwas Billiges.
Da gebe ich lieber ein paar Euro mehr aus und habe dann ein Produkt, bei dem ich mich nicht immerzu ärgern muss...
Dieses kleine Stativ kann mit meinem großen halb-Profi-Stativ sehr gut mithalten. Ich bin sehr zufrieden!


2019年8月10日にドイツでレビュー済み
Daher suchte ich ergänzend noch ein kleines, handliches Stativ, das man völlig problemlos in einer Handtasche, einem kleinen Rucksack oder ähnlichem mitnehmen kann. Das habe ich gefunden!
Das Stativ ist erstaunlich stabil und kippsicher.
Zwar habe ich es mir eher nur fürs Smartphone gekauft - aber ich habe versuchsweise auch mal meine Spiegelreflex-Kamera aufgeschraubt und das war absolut unproblematisch. Das hat mich schon sehr beeindruckt.
Auch auf eher unebenen Flächen, wie beispielsweise einer Mauer oder einem Baumstamm, steht es dank des Dreibeins sehr fest.
Die kleine Wasserwaage ermöglicht eine einwandfreie horizontale Ausrichtung.
Die Schrauben und der Schnellspanner machen einen soliden Eindruck.
Ebenso wie das komplette Stativ sehr robust und hochwertig erscheint.
Ja, es ist nicht unbedingt preiswert - aber wenn ich etwas Billiges will, erhalte ich auch etwas Billiges.
Da gebe ich lieber ein paar Euro mehr aus und habe dann ein Produkt, bei dem ich mich nicht immerzu ärgern muss...
Dieses kleine Stativ kann mit meinem großen halb-Profi-Stativ sehr gut mithalten. Ich bin sehr zufrieden!





Can someone contact me about a replacement part or something? I bought it Feb 2020.


2021年2月10日にアメリカ合衆国でレビュー済み
Can someone contact me about a replacement part or something? I bought it Feb 2020.



of equipment at many different levels of size, quality and price. I have several SmallRig
products in my arsenal for which I use as a bridge between my many cameras and the
associated accessories.
Right out of the box, I was immediately impressed with the solid build quality and
compactness of this tabletop tripod.
I've used many types of tabletop tripods, but this one is by far the sturdiest and feature
loaded.
This unit cost me $40. and judging by competition out there for similar products, I would
expect this one to be 2 to 3 times more expensive than it actually is.
I tested out a variety of cameras on this including; a Sony A7s(pictured), Canon T3i,
BlackMagic Micro Cinema camera, etc. But what really surprised me, was that it was
able to hold up my 10 lb Blackmagic Ursa Mini if balanced properly. Not that I would
ordinarily mount such a large heavy camera on this, but for a test, it was nice to see that
it can handle the weight.
This tripod is perfectly suited for medium to full sized mirrorless and DSLR cameras, as
well as medium sized camcorders. For me, it’s all about compactness for travelling.
Great low profile spread for a stable low center of gravity.
Although it is not a typical fluid head video tripod using a drag system, upon loosening
the pan lock, the ball head had a decent amount of resistance to achieve smooth
panning shots with a 50mm prime. Something I was not expecting and very pleased
with. The ball head has a decent amount of adjustability and a nice tight locking grip. It
is nice to see that one can pull and rotate the two locking knobs for clearance so the
plate and camera do not come in contact to the knobs. The bubble level on the plate
locking knob is also a handy added feature for portrait shooting. The unit folds up nicely
for a compact design without a compromise on its strength and durability. It's also nice
to see an all metal design, something which in my option is a staple trademark of
SmallRig. The rivet secured rubber feet are fantastic with high quality thick rubber
providing a solid traction at a multitude of angles. The ball head can also be easily
removed and attached to any 3/8" male threaded equipment like magic arms or
superclamps. I used this ball head to attach to a slider carriage on a shoot yesterday
and it worked beautifully.
I love this tripod for its excellent design, durability and fantastic price point!


2019年3月20日にアメリカ合衆国でレビュー済み
of equipment at many different levels of size, quality and price. I have several SmallRig
products in my arsenal for which I use as a bridge between my many cameras and the
associated accessories.
Right out of the box, I was immediately impressed with the solid build quality and
compactness of this tabletop tripod.
I've used many types of tabletop tripods, but this one is by far the sturdiest and feature
loaded.
This unit cost me $40. and judging by competition out there for similar products, I would
expect this one to be 2 to 3 times more expensive than it actually is.
I tested out a variety of cameras on this including; a Sony A7s(pictured), Canon T3i,
BlackMagic Micro Cinema camera, etc. But what really surprised me, was that it was
able to hold up my 10 lb Blackmagic Ursa Mini if balanced properly. Not that I would
ordinarily mount such a large heavy camera on this, but for a test, it was nice to see that
it can handle the weight.
This tripod is perfectly suited for medium to full sized mirrorless and DSLR cameras, as
well as medium sized camcorders. For me, it’s all about compactness for travelling.
Great low profile spread for a stable low center of gravity.
Although it is not a typical fluid head video tripod using a drag system, upon loosening
the pan lock, the ball head had a decent amount of resistance to achieve smooth
panning shots with a 50mm prime. Something I was not expecting and very pleased
with. The ball head has a decent amount of adjustability and a nice tight locking grip. It
is nice to see that one can pull and rotate the two locking knobs for clearance so the
plate and camera do not come in contact to the knobs. The bubble level on the plate
locking knob is also a handy added feature for portrait shooting. The unit folds up nicely
for a compact design without a compromise on its strength and durability. It's also nice
to see an all metal design, something which in my option is a staple trademark of
SmallRig. The rivet secured rubber feet are fantastic with high quality thick rubber
providing a solid traction at a multitude of angles. The ball head can also be easily
removed and attached to any 3/8" male threaded equipment like magic arms or
superclamps. I used this ball head to attach to a slider carriage on a shoot yesterday
and it worked beautifully.
I love this tripod for its excellent design, durability and fantastic price point!









