I am fortunate to have a few stores locally that have mounted presses on display. This made it possible to handle all the products I was considering before making a purchase. These were the Hornady Lock-N-Load, Redding Big Boss II, and of course the RCBS Rock Chucker Supreme. Of these single stage presses, it was very easy to narrow it down to the Redding Big Boss II, and the RCBS Rock Chucker Supreme. The Hornady Lock-N-Load press was removed from consideration because it has a smaller opening, smaller ram diameter, and uses the Hornady die bushing insert, something I don't want. The RCBS and Redding are very similar in build quality and I would probably be just as happy using the Redding as I am using the RCBS. They both operate very smoothly, and are extremely overbuilt. It's hard to imagine a situation where someone could destroy either of these presses using them as intended. Ultimately, I decided on the Rock Chucker Supreme because it went on sale, making it ~$75 less than the Redding.
PROS:
-Extremely overbuilt.
-Extremely smooth operation.
-Ambidextrous design.
-Cam-over design.
-American made. That's right! I see a lot of misinformation regarding where this RCBS press is made. The box indicates it's made in the USA, so that's what I'm going by unless someone can provide evidence otherwise.
-Fantastic customer support.
CONS:
-Depriming setup is terrible. I don't deprime on my main presses, so it's a non-issue for me. But keep this in mind if you plan to use this press for that. The plastic spent primer catcher just pinches on the press and is tedious to remove without spilling primers.
-RCBS only includes one primer arm assembly, for both size primer cups. This means you have to take apart the primer assembly to switch between large and small primers. It's tedious and time consuming. Or you could contact RCBS like I did, and have them send you the parts for another complete primer assembly. Parts were sent to me free of charge, and now switching between large and small primers is super easy. They should just include two assemblies in the box.
For those that are wondering why I didn't consider the Lee Classic Cast press, it's simple. I already own the Lee Classic Turret press, and I knew it was not what I wanted for my "cadillac" single stage press. To elaborate, Lee sells two versions of the Classic Cast press. The original version deprimes through the 1.125" hollow tube ram. See my review of the Classic Turret press for images of this. I wanted a solid ram for tough rifle sizing and swager use. The newer Breech Lock Classic Cast press has a solid ram, but requires the use of Breech Lock die bushings, which I don't want. Then there are other reasons, such as the linkage is not as smooth as other brands due to an angled design that uses a wave washer. Also, the primer setup is not what I was looking for. Then, the press design makes it difficult to use the RCBS swager combo tool. And just in general, while I do like Lee products and own quite a few, they lack the refined quality I was looking for in a single stage press.
I have loaded hundreds of rounds using this Rock Chucker press without any issues. It was a good purchase that I highly recommend.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Add a debit or credit card to save time when you check out
Convenient and secure with 2 clicks. Add your card
Frequently bought together
From the manufacturer
RCBS Rock Chucker Supreme Press Single Stage
|
|
|
|
|---|---|---|
Durable ConstructionThe Rock Chucker features a durable, cast iron construction, granting outstanding strength and versatility. |
Ambidextrous, O-Frame DesignAn ambidextrous o-frame design makes the Rock Chucker easy to use for anyone. |
Large Loading WindowWith a 4.25 inch loading window, the Rock Chucker accounts for today's longer cartridges, making reloading more efficient. |
RCBS Unboxed
- Rock Chucker Supreme Press
- Ambidextrous handle
- Instruction manual
- Primer catcher
Master Your Reloading
Become a better reloader and master your craft with the Rock Chucker Supreme Press. With it, you will be on the fast track to becoming a pro reloader.
|
|
|
||
|---|---|---|---|---|
| RCBS Rock Chucker Supreme Press | RCBS Turret Press | RCBS Summit Press | RCBS Summit Press | |
|
|
||||
| Customer Reviews |
972
|
98
|
202
|
— |
| Price | $229.99 | $423.15 | $334.49 | — |
| Cast Iron Frame | ✓ | ✓ | ✓ | |
| Ambidextrous Design | ✓ | ✓ | ✓ | |
| Moving Case | ✓ | ✓ | ||
| O-Frame Design | ✓ |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
2:50
Click to play video
Must Watch - One Priming Tool For Every Caliber.
Gadget Junkie Reviews
Videos for this product
1:59
Click to play video
Works Great. One Word Of Caution Before Buying.
Gadget Junkie Reviews
Reviews with images
Solid as a rock!
I am fortunate to have a few stores locally that have mounted presses on display. This made it possible to handle all the products I was considering before making a purchase. These were the Hornady Lock-N-Load, Redding Big Boss II, and of course the RCBS Rock Chucker Supreme. Of these single stage presses, it was very easy to narrow it down to the Redding Big Boss II, and the RCBS Rock Chucker Supreme. The Hornady Lock-N-Load press was removed from consideration because it has a smaller opening, smaller ram diameter, and uses the Hornady die bushing insert, something I don't want. The RCBS and Redding are very similar in build quality and I would probably be just as happy using the Redding as I am using the RCBS. They both operate very smoothly, and are extremely overbuilt. It's hard to imagine a situation where someone could destroy either of these presses using them as intended. Ultimately, I decided on the Rock Chucker Supreme because it went on sale, making it ~$75 less than the Redding.PROS:-Extremely overbuilt.-Extremely smooth operation.-Ambidextrous design.-Cam-over design.-American made. That's right! I see a lot of misinformation regarding where this RCBS press is made. The box indicates it's made in the USA, so that's what I'm going by unless someone can provide evidence otherwise.-Fantastic customer support.CONS:-Depriming setup is terrible. I don't deprime on my main presses, so it's a non-issue for me. But keep this in mind if you plan to use this press for that. The plastic spent primer catcher just pinches on the press and is tedious to remove without spilling primers.-RCBS only includes one primer arm assembly, for both size primer cups. This means you have to take apart the primer assembly to switch between large and small primers. It's tedious and time consuming. Or you could contact RCBS like I did, and have them send you the parts for another complete primer assembly. Parts were sent to me free of charge, and now switching between large and small primers is super easy. They should just include two assemblies in the box.For those that are wondering why I didn't consider the Lee Classic Cast press, it's simple. I already own the Lee Classic Turret press, and I knew it was not what I wanted for my "cadillac" single stage press. To elaborate, Lee sells two versions of the Classic Cast press. The original version deprimes through the 1.125" hollow tube ram. See my review of the Classic Turret press for images of this. I wanted a solid ram for tough rifle sizing and swager use. The newer Breech Lock Classic Cast press has a solid ram, but requires the use of Breech Lock die bushings, which I don't want. Then there are other reasons, such as the linkage is not as smooth as other brands due to an angled design that uses a wave washer. Also, the primer setup is not what I was looking for. Then, the press design makes it difficult to use the RCBS swager combo tool. And just in general, while I do like Lee products and own quite a few, they lack the refined quality I was looking for in a single stage press.I have loaded hundreds of rounds using this Rock Chucker press without any issues. It was a good purchase that I highly recommend.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on March 17, 2016
Style: Ammo Reloading PressVerified Purchase
I am fortunate to have a few stores locally that have mounted presses on display. This made it possible to handle all the products I was considering before making a purchase. These were the Hornady Lock-N-Load, Redding Big Boss II, and of course the RCBS Rock Chucker Supreme. Of these single stage presses, it was very easy to narrow it down to the Redding Big Boss II, and the RCBS Rock Chucker Supreme. The Hornady Lock-N-Load press was removed from consideration because it has a smaller opening, smaller ram diameter, and uses the Hornady die bushing insert, something I don't want. The RCBS and Redding are very similar in build quality and I would probably be just as happy using the Redding as I am using the RCBS. They both operate very smoothly, and are extremely overbuilt. It's hard to imagine a situation where someone could destroy either of these presses using them as intended. Ultimately, I decided on the Rock Chucker Supreme because it went on sale, making it ~$75 less than the Redding.
PROS:
-Extremely overbuilt.
-Extremely smooth operation.
-Ambidextrous design.
-Cam-over design.
-American made. That's right! I see a lot of misinformation regarding where this RCBS press is made. The box indicates it's made in the USA, so that's what I'm going by unless someone can provide evidence otherwise.
-Fantastic customer support.
CONS:
-Depriming setup is terrible. I don't deprime on my main presses, so it's a non-issue for me. But keep this in mind if you plan to use this press for that. The plastic spent primer catcher just pinches on the press and is tedious to remove without spilling primers.
-RCBS only includes one primer arm assembly, for both size primer cups. This means you have to take apart the primer assembly to switch between large and small primers. It's tedious and time consuming. Or you could contact RCBS like I did, and have them send you the parts for another complete primer assembly. Parts were sent to me free of charge, and now switching between large and small primers is super easy. They should just include two assemblies in the box.
For those that are wondering why I didn't consider the Lee Classic Cast press, it's simple. I already own the Lee Classic Turret press, and I knew it was not what I wanted for my "cadillac" single stage press. To elaborate, Lee sells two versions of the Classic Cast press. The original version deprimes through the 1.125" hollow tube ram. See my review of the Classic Turret press for images of this. I wanted a solid ram for tough rifle sizing and swager use. The newer Breech Lock Classic Cast press has a solid ram, but requires the use of Breech Lock die bushings, which I don't want. Then there are other reasons, such as the linkage is not as smooth as other brands due to an angled design that uses a wave washer. Also, the primer setup is not what I was looking for. Then, the press design makes it difficult to use the RCBS swager combo tool. And just in general, while I do like Lee products and own quite a few, they lack the refined quality I was looking for in a single stage press.
I have loaded hundreds of rounds using this Rock Chucker press without any issues. It was a good purchase that I highly recommend.
PROS:
-Extremely overbuilt.
-Extremely smooth operation.
-Ambidextrous design.
-Cam-over design.
-American made. That's right! I see a lot of misinformation regarding where this RCBS press is made. The box indicates it's made in the USA, so that's what I'm going by unless someone can provide evidence otherwise.
-Fantastic customer support.
CONS:
-Depriming setup is terrible. I don't deprime on my main presses, so it's a non-issue for me. But keep this in mind if you plan to use this press for that. The plastic spent primer catcher just pinches on the press and is tedious to remove without spilling primers.
-RCBS only includes one primer arm assembly, for both size primer cups. This means you have to take apart the primer assembly to switch between large and small primers. It's tedious and time consuming. Or you could contact RCBS like I did, and have them send you the parts for another complete primer assembly. Parts were sent to me free of charge, and now switching between large and small primers is super easy. They should just include two assemblies in the box.
For those that are wondering why I didn't consider the Lee Classic Cast press, it's simple. I already own the Lee Classic Turret press, and I knew it was not what I wanted for my "cadillac" single stage press. To elaborate, Lee sells two versions of the Classic Cast press. The original version deprimes through the 1.125" hollow tube ram. See my review of the Classic Turret press for images of this. I wanted a solid ram for tough rifle sizing and swager use. The newer Breech Lock Classic Cast press has a solid ram, but requires the use of Breech Lock die bushings, which I don't want. Then there are other reasons, such as the linkage is not as smooth as other brands due to an angled design that uses a wave washer. Also, the primer setup is not what I was looking for. Then, the press design makes it difficult to use the RCBS swager combo tool. And just in general, while I do like Lee products and own quite a few, they lack the refined quality I was looking for in a single stage press.
I have loaded hundreds of rounds using this Rock Chucker press without any issues. It was a good purchase that I highly recommend.
Images in this review
Top reviews from other countries
Cliente de Amazon
La mejor prensa
Reviewed in Mexico on February 20, 2024Style: Ammo Reloading PressVerified Purchase
Martin Hamer
Solid construction, ease of use and reliability are synonymous with RCBS products
Reviewed in Canada on May 20, 2022Style: Ammo Reloading PressVerified Purchase
Rod
Absolutely can't go wrong with the Rock Chucker!
Reviewed in Canada on September 1, 2023Style: Ammo Reloading PressVerified Purchase
JC
Top Reloading Press
Reviewed in Canada on October 18, 2021Style: Ammo Reloading PressVerified Purchase
